NuScale Power and Prodigy Clean Energy announced on October 26 that they have developed a conceptual design for a transportable, marine-based small modular reactor. The companies plan to present the design to utilities, regulators, and shipyard manufacturers. Prodigy, a Canadian company “specializing in the development of transportable nuclear power plants,” and NuScale signed a memorandum of understanding in 2018 agreeing to pursue the development of an SMR marine facility.

The Department of Energy’s Office of Environmental Management (EM) announced that construction of Hanford’s K East Reactor cocoon has been completed ahead of schedule and under budget. Cocooning of K East—enclosing it in a protective steel structure while the reactor’s radioactivity naturally decays—was one of EM’s key construction priorities for 2022.

The trouble with tritium is there is no trouble with tritium.

At any level outside the laboratory, either experimental or manufacturing, tritium is harmless. Every year, we routinely release millions of gallons of slightly tritiated water to the ocean, large lakes, and large rivers from almost every commercial nuclear reactor in the world, and have done so for decades, all in accordance with globally accepted nuclear safety standards. And no adverse effects on the environment or humans have ever been seen.

Any method that can enhance safety, reduce risk, and lower costs is worth a second look. When that method proves it has the potential to optimize aging management at any nuclear power plant, it’s time to spread the word.

In 2019, a small team focused on selective leaching began looking for a way to use risk insights to optimize the implementation of deterministic aging management programs (AMPs). What they started soon grew into a large team effort by Constellation, Ameren, the Electric Power Research Institute (EPRI), and the Nuclear Energy Institute (NEI), along with contractors Enercon and Jensen Hughes, to develop a generic framework and then test it in two very different pilot applications.

Unit 3 at Slovakia’s Mochovce nuclear power plant achieved initial criticality on October 22, plant owner Slovenské Elektrárne has announced.

The utility started the reactor’s first fuel load September 9—after receiving in August a final authorization for commissioning from the Slovak Nuclear Regulatory Authority—and completed the process three days later.

The Department of Energy announced $150 million in Inflation Reduction Act funding on October 25 for infrastructure improvements at Idaho National Laboratory. According to the DOE, the funding will support nearly a dozen projects at INL’s Advanced Test Reactor (ATR) and Materials Fuels Complex (MFC), both of which have operated for more than 50 years. The investments in existing infrastructure assets mean support for nuclear energy research and development, including fuel testing, bolstering the near-term supply of high-assay low-enriched uranium (HALEU), and reactor demonstrations.

Nuclear technology firm TerraPower and utility partner PacifiCorp have launched a study to evaluate the feasibility of deploying up to five additional Natrium reactor and integrated energy storage systems in the utility’s service territory by 2035, the companies announced yesterday. (PacifiCorp’s business units—Pacific Power and Rocky Mountain Power—serve customers in California, Oregon, and Washington, and in Idaho, Utah, and Wyoming, respectively.)

In the summer of 2019, three students from the University of South Carolina–Aiken (USCA) had an idea to digitize the isotope. Wei Zheng, Drake Jones, and Joseph Taylor set out to design an app that would be an interactive one-stop shop for information about any isotope—number of protons and neutrons, whether it is stable or radioactive, its natural abundance on earth, and even its uses. From these ideas, the Interactive Isotopes App began to take shape.

The app’s launch was disrupted by the COVID-19 pandemic; although it was complete after three years of work and development, the creators sat on it. On October 12, the app at long last went live on the ANS website.

Framatome has completed the second 18-month cycle of its GAIA Protect Enhanced Accident Tolerant Fuel (EATF) technology at Vogtle’s Unit 2 in Waynesboro, Ga. Inspections afterward revealed that the full-length chromium-coated fuel rods maintained their original characteristics, while the chromia-enhanced pellets operated as designed during 36 months of reactor operation.

Tokamak Energy’s ST40, which achieved plasma temperatures of 100 million °C earlier this year. (Photo: Tokamak Energy)

Tokamak Energy on October 26 announced plans to construct a high field spherical tokamak using high-temperature superconducting (HTS) magnets. Dubbed the ST80-HTS, the machine would demonstrate multiple technologies required to achieve commercial fusion energy, the company says. Tokamak Energy plans to complete the ST80-HTS in 2026 to demonstrate spherical tokamak operations and inform the design of its successor, a fusion pilot plant called ST-E1 that the company says could deliver electricity into the grid in the early 2030s and produce up to 200 MWe.

Temperature milestone: Earlier this year, the company’s ST40 spherical tokamak reached the commercial fusion energy plasma temperature threshold of 100 million °C with what was reported as the highest triple product (an industry measure of plasma density, temperature, and confinement) of any private fusion energy company. The ST40 achieved those results with a plasma volume of less than one cubic meter, which is 15 times less volume than any other tokamak that has achieved the same threshold.

Canada Infrastructure Bank (CIB) has finalized an agreement with Ontario Power Generation, committing C$970 million (about $715 million) to Canada’s first small modular reactor, to be located at OPG’s Darlington nuclear power plant in Clarington, Ontario.

A state-owned enterprise founded in 2017, CIB is charged with financially supporting revenue-generating infrastructure projects in the public interest via public-private partnerships. The agreement with OPG is the bank’s largest investment in clean power to date, according to a Tuesday joint announcement.

Heating of the first waste vitrification melter at the Department of Energy’s Hanford Site was paused after operators identified an “abnormal condition with the startup heater power supplies,” the DOE’s Office of River Protection (ORP) said. Heat-up of the 300-ton melter, which will be used to vitrify Hanford’s low-level radioactive tank waste, was initiated on October 8.

The Department of Energy held a groundbreaking ceremony on October 24 for the Stable Isotope Production and Research Center (SIPRC) at Oak Ridge National Laboratory in Tennessee. The center is being built to expand the nation’s capability to enrich stable isotopes for medical, industrial, and research applications.

Global Nuclear Fuel–Americas (GNF-A) and TerraPower announced their plans to build a Natrium fuel fabrication facility next to GNF-A’s existing fuel plant near Wilmington, N.C, on October 21. While more than 50 years of fuel fabrication at the site have supported the boiling water reactor designs of GE (GNF-A’s majority owner) and GE Hitachi Nuclear Energy (GEH), the Natrium Fuel Facility will produce metallic high-assay low-enriched uranium (HALEU) fuel for the sodium fast reactor—Natrium—that TerraPower is developing with GEH.

The Department of Energy is providing $38 million in funding for a dozen projects aimed at developing technologies to advance spent nuclear fuel reprocessing, reduce the volume of high-level waste requiring permanent disposal, and provide domestic advanced reactor fuel stocks. The projects are being led by universities, private companies, and national laboratories.

Poland’s deputy prime minister Jacek Sasin and U.S. energy secretary Jennifer Granholm meet in Washington on October 23. (Photo: gov.pl)

Following a meeting in Washington, D.C., on Sunday with secretary of energy Jennifer Granholm, Polish deputy prime minister Jacek Sasin told reporters that his nation is close to choosing the reactor supplier for its initial nuclear plant project, adding, according to Bloomberg, “There is a big chance that we will finally pick Westinghouse.”

And in a news release on the meeting from the Polish government, Sasin is quoted as saying, “The massive energy crisis that is currently affecting us means that we must quickly make decisions on building the country’s energy security based on new, clean, cheap, and reliable sources, and such a source is nuclear energy. We want the decisive decisions to be made as soon as possible. That is why we asked [Granholm] for a meeting, during which we will clarify all the issues that remain to be clarified.”

NuScale Power announced October 20 that the Nuclear Regulatory Commission’s Advisory Committee on Reactor Safeguards (ACRS) issued a letter the previous day agreeing with NRC staff’s approval of NuScale’s methodology for determining the plume exposure pathway emergency planning zone (EPZ). As approved, the methodology would permit a smaller EPZ—dependent on site-specific conditions, including seismic hazards—that provides the same level of protection to the public as the 10-mile radius EPZs used for existing U.S. nuclear power plants.

In case anyone forgot, Russia can build nuclear power plants, not just occupy them—as discussed a week ago on Newswire. Last week in Bangladesh, workers completed the installation of the reactor pressure vessel (RPV) for the second unit at the Rooppur construction site.

The International Atomic Energy Agency has released this year’s edition of Country Nuclear Power Profiles (CNPP), an annual report providing background information on the status and development of IAEA member states’ nuclear power programs. It contains historical information for 50 countries, including 30 with operating plants and 20 with past or planned programs.

General Atomics (GA) announced on October 20 that it has developed a steady-state, compact advanced tokamak fusion pilot plant concept “where the fusion plasma is maintained for long periods of time to maximize efficiency, reduce maintenance costs, and increase the lifetime of the facility.”