The Department of Energy has announced that it will make $16 million in funding available to communities interested in learning more about “consent-based siting, management of spent nuclear fuel, and interim storage facility siting considerations.” The funding opportunity follows the DOE’s recent update to its consent-based process for siting an interim storage facility for SNF.

This spring, the U.S. Government Accountability Office (GAO) released an insightful report reviewing and summarizing the status and performance of the largest projects and operations within the Department of Energy’s Office of Environmental Management (EM), which is responsible for the cleanup of hazardous and radioactive waste at sites and facilities that have been contaminated from decades of nuclear weapons production and nuclear energy research.

Grace Stanke in front of the cooling towers at the Byron generating station during this spring’s outage.

"Miss Wisconsin" and "nuclear engineer" are two phrases you have probably never heard in the same sentence before. And not just Wisconsin—it’s never been heard in any state. As Miss Wisconsin 2022, I will be the first nuclear engineering student ever to compete for the title of Miss America, an iconic position for which thousands of women across the country strive (which pays six figures and has the potential of thousands of dollars in scholarship earnings).

Over the summer, in an attempt to help find another opportunity to offset the cost of the last year of my education, I competed for the title of Miss Wisconsin for the second time. I was lucky enough this time to be selected for the job after competing against 22 candidates in the interview, talent, social impact pitch, red carpet wear, and onstage question events.

As Miss Wisconsin, I will travel thousands of miles across the state to attend community events, visit schools, and lead speaking engagements related to the Miss America Organization, my social impact initiative, and my career in nuclear energy. My social impact initiative, “Clean Energy, Cleaner Future,” promotes America’s transition to zero-­carbon energy with an emphasis on nuclear power, because I believe it is the best path forward as our major power source.

Released this week in the lead-up to November’s COP27 event in Egypt is a report from the United Nations Economic Commission for Europe, Carbon Neutrality in the UNECE Region: Technology Interplay under the Carbon Neutrality Concept, which calls for maximizing the use of all low- and zero-carbon technologies—including nuclear technology—to achieve net-zero carbon emissions by 2050.

Termed by the UNECE a “roadmap to carbon neutrality for Europe, North America, and Central Asia,” the 60-page report finds that to attain the net-zero goal, investment in energy as a percentage of gross domestic product needs to grow from 1.24 percent in 2020 to 2.05 percent every year from 2025 until 2050—translating to between $44.8 trillion and $47.3 trillion by 2050, with any additional delay in taking action adding to that price tag.

Barabaschi

Capping a session in Paris, the ITER Council has unanimously selected Pietro Barabaschi as the new director-general of the ITER Organization. The Italian-born Barabaschi, who has been involved in nuclear fusion research for some 30 years, was chosen to lead the massive international fusion project following an intensive recruitment effort necessitated by the death of Bernard Bigot, the previous director general, in May. Since Bigot’s death, Eisuke Tada has been serving in the role in an interim capacity. Barabaschi will take office in October.

F4E leader: Barabaschi has been the head of the Broader Approach Programme and Delivery with Fusion for Energy (F4E) since 2008. F4E is the EU organization responsible for Europe’s contribution to ITER. In this position, he has been managing the department that oversees three projects stemming from the Broader Approach agreement between the European Atomic Energy Community (Euratom) and the government of Japan: the JT-60SA tokamak, the International Fusion Materials Irradiation Facility/Engineering Validation and Engineering Design Activities linear accelerator, and the International Fusion Energy Research Centre . Barabaschi has also been acting director of F4E.

Some eight months after the Nuclear Regulatory Commission denied Oklo Inc.’s license application to build and operate its Aurora microreactor in Idaho, the company has returned to the regulatory fray. On Wednesday, Oklo announced that it has submitted to the NRC a licensing project plan (LPP) outlining its proposed engagement to support future Aurora licensing activities.

The Department of Energy announced September 13 that it would spend up to $10 million in a bid to settle the question of whether low-energy nuclear reactions (LENR)—historically known as “cold fusion”—could ever become a carbon-free energy source. The funding is part of an Advanced Research Projects Agency–Energy (ARPA-E) LENR Exploratory Topic designed to “encourage the submission of the most innovative and unconventional ideas in energy technology.”

As the largest ultra-low-carbon electricity source in the United States, nuclear energy is a vital pillar of the effort to mitigate climate change. Deployment of advanced nuclear reactor and fuel technologies has been identified as a unique challenge in the production of new nuclear power plants to help maintain and grow our nuclear generating capacity. The licensing of novel nuclear reactor technologies also continues to be a facet of the broader challenge of advanced reactor deployment. When it comes to non–light water reactors and Generation III+ light water reactors, such as the AP-1000 or EPR, deployment is “2X over budget and behind schedule.”¹ However, in the case of recent large Generation III+ light water reactors, licensing has not been the rate-limiting step in the reactor deployment timeline, nor has it had a first-order impact on cost. With that said, several significant advances have been made in the expedition of licensing. This article focuses on three areas where progress has been made since this grand challenge was formulated in 2017, with highlights of some examples where the American Nuclear Society has guided or supported this progress.

Clean energy technology firm Bloom Energy has announced plans to install a 240-kW electrolyzer at Xcel Energy’s Prairie Island plant in Red Wing, Minn., to demonstrate the benefits of producing hydrogen with nuclear power. (One of Xcel’s two nuclear plants, Prairie Island houses twin 550-MWe pressurized water reactors.)

Holtec International announced that its flagship HI-STORM Multi-Purpose Canister (MPC) spent fuel storage technology was selected by Spain’s national company Enresa for a fleet of six nuclear power reactors at four plant sites in the country. Equipos Nucleares S.A. (ENSA), a Cantabria-based manufacturer of equipment for the Spanish nuclear fleet, was named a consortium partner with Holtec in the order, which was conducted under European Union procurement rules.

The American Nuclear Society student section at the University of Puerto Rico—Mayagüez (UPRM) recently welcomed Christopher T. Hanson, chairman of the U.S. Nuclear Regulatory Commission. While at UPRM, Hanson met with graduate students conducting nuclear-related research, as well as with deans, professors, and other university officials. He also delivered a speech, “Preparing to Regulate the Nuclear Technology of the Future.”

Curtiss-Wright Corporation and small modular reactor developer X-energy have announced the signing of a preferred strategic supplier agreement to advance the design and deployment of the latter’s Xe-100 SMR.

Scientists at Lawrence Livermore National Laboratory and Oregon State University (OSU) have developed a promising new method to isolate and study some of the rarest elements on Earth. Focused first on curium, they have identified three new complexes containing curium ions and revealed the molecules’ 3D structures, as well as previously unknown features.

Laufer

Developing a first-­of-­a-­kind reactor is a daunting endeavor. To be successful, advanced reactor designers need to achieve cost certainty by delivering a safe and affordable product at the promised cost. To meet this goal, Kairos Power structured its approach around four key strategies: 1) achieving technology certainty through a rapid iterative approach; 2) achieving construction certainty by demonstrating the ability to build it; 3) achieving licensing certainty by proving Kairos can license it; and 4) achieving supply chain certainty by vertically integrating critical capabilities. By mitigating risk in these four key areas, Kairos Power is confident that it will get true cost certainty for our future products.

The third prong in Kairos’s strategy—achieving licensing certainty—was a key driver in the decision to build the Hermes low-­power demonstration reactor, and it remains a major workstream as the company’s construction permit application (CPA) undergoes review by the U.S. Nuclear Regulatory Commission. Licensing a new nuclear technology is no small challenge, and there are multiple approaches companies can take. Here’s a look at how we at Kairos are approaching it.

Paragon Energy Solutions and Reuter-Stokes have signed a contract to design and manufacture neutron monitoring detectors for small modular reactor developer NuScale Power.

The American Nuclear Society is hosting the side event panel "Advanced Nuclear Reactors: A Possible Solution to Global Warming and Global Energy Poverty" at the Global Clean Energy Action Forum’s Clean Energy Ministerial (CEM) . The event will be held at the David L. Lawrence Convention Center in Pittsburgh, Pa., on Thursday, September 22, from 1:45 to 2:45 p.m. EDT.

The event is open to all CEM participants.

Atkins Nuclear Secured Holding Corporation, a member of the SNC-Lavalin Group, celebrated the start of construction on its new, $20 million, state-of-the-art Atkins Technology Center (ATC) with a ground-breaking ceremony held on September 13 in Richland, Wash. Located near the Department of Energy’s Hanford nuclear reservation, the facility will be adjacent to the existing Atkins Engineering Laboratory.

Examining Supply-Side Options to Achieve 100% Clean Electricity by 2035 was written by research staff at the National Renewable Energy Laboratory, so its reliance on solar and wind energy to decarbonize the grid by 2035 is not surprising. But that’s a big ask for any variable energy technology, especially if the nation’s largest source of clean power—nuclear energy—is relegated to a supporting role. Massive additions of solar and wind energy on the order of 2 TW would require a supporting infrastructure of new transmission lines, as well as batteries and hydrogen for daily and seasonal energy storage that would drive demand and capacity requirements higher.

The Hanford tanks, on which building began in 1943, were never supposed to hold waste for many decades. If grouting and disposal had occurred according to plans from the 1980s, this waste would already be in the ground and we would have saved almost $100 billion. (Photo: DOE)

At the end of June, a federal judge approved, with the agreement of the Washington State Department of Ecology, a request to push back the deadline 20 months for beginning nuclear waste treatment at the $17 billion Waste Treatment and Immobilization (Vit) Plant at the Hanford Site because of pandemic-related delays. The Direct-Feed Low-Activity Waste program is the Department of Energy’s plan to start treating low-level radioactive waste first at the Vit Plant and then start treating high-level radioactive waste sometime in the 2030s.

This is the fifth delay granted by the court for the project, which should have begun operations in 2007. In one sense, this delay is good, since turning LLW into glass through vitrification is about as smart as singing into the wind. The chemistry of this waste makes it much better suited to grouting, a treatment used by everyone else in the United States and the world.

As citizens of the United Kingdom and others around the world mourn the death of Queen Elizabeth II, many have reflected on how the world has changed during the seven decades of the queen’s reign—the same decades that saw the rise of civilian nuclear power.

Calder Hall was already under construction at the Sellafield site in West Cumbria when Princess Elizabeth became queen in 1953. Queen Elizabeth traveled to the site in October 1956 and declared, in a televised ceremony, that “It is with pride that I now open Calder Hall, Britain’s first atomic power station.” Watch the fanfare in a historical clip uploaded to YouTube by Sellafield Ltd below.