Research & Applications

The Department of Energy announced $7 billion on October 13 to launch seven regional Clean Hydrogen Hubs (H2Hubs) across the country and accelerate the commercial-scale deployment of clean hydrogen. Two of the seven hubs will feature hydrogen production using electricity—and possibly steam—from nuclear power. The federal government’s multibillion-dollar investment will be matched and exceeded by more than $40 billion from the awardees, for a total investment in clean energy and job creation near $50 billion.

At the American Nuclear Society’s 2023 Winter Meeting in November, a panel of experts will provide insights and opinions on the funding of nuclear energy research in the United States. The executive session “Rethinking How We Structure Federal R&D Programs in Nuclear Energy” will feature the University of Michigan’s Todd Allen, Aditi Verma, and Sola Talabi, and Idaho National Laboratory’s Jess Gehin.

Researchers at Idaho National Laboratory have a new experimental tool to study nuclear fuel under simulated loss of coolant accident (LOCA) conditions in INL’s Transient Reactor Test (TREAT) Facility. A specialized experiment holder called a TWIST capsule holds a fuel sample surrounded by water, which can rapidly drain away during testing, simulating loss of coolant in a light water reactor environment.

Following the February 2021 radiation release at the National Institute of Standards and Technology (NIST) resulting from a fuel failure in the 20-MWt NIST Center for Neutron Research (NCNR) research reactor, NIST investigated the root cause of the incident and developed corrective actions. The Nuclear Regulatory Commission’s probe of the incident found apparent violations and resulted in a confirmatory order issued in August 2022.

Southern Company, TerraPower, and Core Power (a U.K.-based firm focused on developing nuclear technologies for the maritime sector) have commenced pumped-salt operations in the Integrated Effects Test (IET) facility, the Atlanta, Ga.-based utility announced Tuesday, marking another milestone in the development of TerraPower’s first-of-a-kind, Generation IV Molten Chloride Fast Reactor (MCFR).

The Nuclear Regulatory Commission on October 4 made available preliminary proposed rule language for the licensing and regulation fusion energy systems. The proposed rulemaking, which would amend parts 20, 30, and 51 of Title 10 of the Code of Federal Regulations, would provide a limited-scope, technology-inclusive regulatory framework for a broad array of fusion systems currently under development.

When Norway’s Halden research reactor shut down in 2018, nuclear researchers around the world were forced to scramble. For 60 years, the Halden Reactor Project offered a 25-MWt boiling water reactor for research where scientists could expand their understanding of nuclear fuel reliability, reactor internals, plant procedures and monitoring, and human factors.

Gateway for Accelerated Innovation in Nuclear (GAIN) has awarded separate vouchers to NuScale Power and Metatomic Energy to support the development of their small modular reactor and spent nuclear fuel conversion technologies.

While initial operation of MARVEL, a tiny microreactor that will be installed and operated inside Idaho National Laboratory’s Transient Reactor Test (TREAT) Facility, might not occur until 2025, testing of a nonnuclear prototype is now under way at the New Freedom, Pa., manufacturing facility of Creative Engineers, Inc. (CEI). The Department of Energy announced the start of prototype testing on September 20.

BWX Technologies is teaming with Crowley, a global shipping and energy supply chain company, under a memorandum of understanding to develop a ship with an onboard microreactor that could deliver power to users on shore via buoyed power cables. The concept, announced by both companies on September 20, is envisioned as a zero-carbon energy option for defense and disaster needs.

Given how much carbon dioxide has been released into the atmosphere from fossil fuels, replacing those fuels with clean options like nuclear energy is urgent, but could be likened to shutting the barn door after the proverbial horse has bolted. But what if you could also round up excess CO₂ already in the atmosphere? That’s the goal of direct air capture (DAC) and other so-called negative emission technologies—to capture climate warming CO₂ for use in products or processes or for permanent storage.

The Nuclear Regulatory Commission announced on September 18 that it expects to award 24 research and development grants totaling more than $11.7 million in fiscal year 2023 University Nuclear Leadership Program (UNLP) funds to university researchers in early 2024.

The Nuclear Regulatory Commission is holding the “Data Science and AI Regulatory Applications Workshop,” tomorrow to discuss the agency’s activities for the safe and secure use of artificial intelligence in NRC-regulated activities.

The Advanced Research Projects Agency–Energy (ARPA-E), a branch of the Department of Energy, is tasked with driving the research and development of cutting-edge energy technologies. The agency’s core emphasis is on mitigating emissions, increasing energy efficiency, reducing imports, ensuring energy systems resiliency, and offering transformative solutions for the management of radioactive waste and spent nuclear fuel (SNF). Its mission is instrumental in ensuring the United States retains its technological superiority in the design and implementation of new energy technologies. Efforts in SNF research also benefit prior investments in ARPA-E’s MEITNER (Modeling-Enhanced Innovations Trailblazing Nuclear Energy Reinvigoration) and GEMINA (Generating Electricity Managed by Intelligent Nuclear Assets) programs, which seek to substantially decrease the capital and operational expenditures associated with advanced reactors (ARs).

The Department of Energy’s Office of Science announced $5.8 million in funding on September 13 for five projects to benchmark nuclear data for a range of nuclear science investigations and applications, including energy, space exploration, and nonproliferation. Four of the five funded projects include participation from Brookhaven National Laboratory.

The Department of Defense announced on September 13 that it has awarded a contract option to X-energy for the “enhanced engineering design” of a microreactor that could serve as the transportable power source envisioned by the Strategic Capabilities Office’s (SCO) Project Pele. The DOD expects the award for one year of work to “allow a thorough analysis of design options,” resulting in a preliminary engineering design and “initiation of a regulatory preapplication process.”

Having decided “to not associate to the Euratom Research and Training program (Euratom R&T) and, by extension, the Fusion for Energy Program,” the government of the United Kingdom announced plans on September 7 to support its homegrown UK Fusion Strategy by investing up to £650 million (about $811.8 million) through 2027 in a suite of research and development programs to support the country’s fusion sector and strengthen international collaboration. The funds are in addition to the £126 million (about $157.3 million) announced in November 2022 to support U.K. fusion R&D.

The Department of Energy announced $29 million in funding for seven team awards for research in machine learning, artificial intelligence, and data resources for fusion energy sciences on August 31. In all, 19 institutions will build algorithms to address high-priority research opportunities in fusion and plasma sciences using interdisciplinary collaborations of fusion and plasma researchers teamed with data and computational scientists.

The Freemelt ONE 3D printer.

Hungary’s Institute for Nuclear Research (ATOMKI) is set to take delivery this year of a 4.6 million Swedish krona ($414,300) electron-beam 3D printer for nuclear material science research.

The printer—the Freemelt ONE model—is manufactured by Freemelt, a Swedish company.

Research plans: ATOMKI intends to use the printer for “research in surface science [and] surface topology, which means creation of new surface structures and composite materials via non-adiabatic [not occurring without heat loss or heat gain] alloying,” according to Kalman Vad, a senior research associate at ATOMKI. “The open architecture and free parametrization of the properties of the [electron] beam makes Freemelt ONE an ideal tool for research purposes.”

Deploying microreactor technology for military applications could have huge impacts on logistics and reliability for the military of the future, and on the commercial use of similar technologies. That’s why the Department of Defense is developing Project Pele—a high-temperature, gas-cooled and TRISO-fueled microreactor, transportable within mobile shipping containers—for testing at Idaho National Laboratory in 2025.