Research & Applications

Under the Radioisotope Power Systems Program, NASA and the Department of Energy have been advancing a novel radioisotope power system (RPS) based on dynamic energy conversion. This approach will manifest a dynamic RPS (DRPS) option with a conversion efficiency at least three times greater than a thermoelectric-based RPS. Significant progress has recently been made toward this end. A one-year system design phase has been completed by NASA industry partner Aerojet Rocketdyne, which resulted in a DRPS with power of 300 watts-electric (W_e) with convertor-level redundancy. In-house technology development at the NASA Glenn Research Center (GRC) has demonstrated the conversion devices in relevant environments and has shown all requirements can be met. Progress has also been made on the control electronics necessary for dynamic energy conversion. Flight-like controllers were recently upgraded and achieved an 11-percentage-point increase in efficiency. Control architectures have been developed to handle the multiconvertor arrangements in the latest DRPS design. A system-level DRPS testbed is currently being assembled that will experimentally demonstrate the DRPS concept being pursued.

The Nuclear Regulatory Commission announced on April 14 that it will regulate fusion energy systems using a framework based on the agency’s 10 CFR Part 30 process for licensing byproduct material facilities—such as particle accelerators—rather than 10 CFR Parts 50 and 52, which are used to license utilization facilities like fission power reactors. The commission’s decision means that future fusion energy facilities could be regulated by Agreement States acting with guidance from the NRC.

Long-duration missions with limited solar exposure need a reliable power source to operate. This makes nuclear power sources (NPSs) an attractive alternative to solar energy for such missions. The implementation of the ESA Safety Policy on the Use of Nuclear Power Sources by the European Space Agency’s Independent Safety Office (ISO) provides a framework for ensuring the safe use of NPSs and sets a standard for future ESA missions. This article provides an overview of how the ISO is implementing the policy in the development and operation of the Argonaut mission, which serves as a valuable case study for understanding the practical application of the ESA safety policy and the importance of ensuring the safe use of NPSs in space.

Craig Piercy
cpiercy@ans.org

Dear member:

Hello from our temporary headquarters in Downers Grove, Ill. Yes, after two years of twists and turns, we have finally completed the sale of our legacy La Grange Park property and are in the process of building out our new space, which will be ready for occupancy later this year.

I know many of you have memories made in “the Schoolhouse,” which served as American Nuclear Society headquarters for nearly 50 years. At one time during the golden age of paper recordkeeping, it housed nearly 100 employees. As the business of running a professional society evolved with the information age, however, so too did our workforce and space needs. Stately though it was, 555 Kensington Avenue proved simply too expensive to heat, cool, mow, plow, and otherwise maintain to an acceptable standard.

The organizers of World Quantum Day, celebrated annually on April 14, want to shift how people think about quantum physics. What can seem like a bafflingly abstract theory tinged with science fiction is actually a fundamental description of reality, the basis of technologies we use every day, and a foundation for future applied science. Whether it’s seen through the lens of fact or fiction, quantum physics has an undeniable “cool” factor, and quantum scientists working in different fields—including fusion energy—are embracing quantum coolness to spread awareness about real science.

Steven Arndt
president@ans.org

Anyone who has heard me speak about the American Nuclear Society recently knows that I like to remind people of the ANS mission and vision statements. I invite people to read the exact words: Our mission is to “advance, foster, and spur the development and application of nuclear science, engineering, and technology to benefit society”; our vision is to see “nuclear technology . . . embraced for its vital contributions to improving peoples’ lives and preserving our planet.”

The meaning behind these statements is that ANS is here to help the profession save the world. I take that seriously: We are here to save the world. This month, Nuclear News is focusing on nuclear science, engineering, and technology’s role in space exploration both now and in the future. When we look at our mission, this is very fitting. The use of nuclear power systems in space goes back almost to the start of ANS. In 1961, the Transit 4A satellite became the first U.S. spacecraft to be powered by a radioisotope thermoelectric generator (RTG). Combined with solar cells, RTGs have been used on the Moon and on satellites and to explore the solar system and beyond. One of the interesting things about these power sources is that they were used to provide both provide electricity and heat to keep the systems they were supporting from freezing. Since then, additional nuclear systems have been designed and developed—including fission power reactors and nuclear thermal propulsion—that will provide significantly more power and faster space journeys.

Lisa D. May

Mikaela Blood

Sara M. Sanders

At the advent of space nuclear power in the 1960s, the combination of fundamental nuclear principles and first-of-its-kind spacecraft technology were the largest barriers to entry. In the modern era, however, nuclear power production and space technology have matured industries and no longer present major challenges. These days, the biggest hurdles are advanced flexible technology development, regulations and policy, and public perception, and these issues must be successfully navigated to clear the way for a nuclear future in space.

In this article, we will explore prior NASA programs that incorporated fission technology for space exploration purposes. We also will look at current programs that incorporate fission technology for deep space missions, including missions to the Moon and Mars.

The latest advances in nuclear fusion, the remaining challenges, and proposals to overcome those challenges are the focus of a new report, Fusion Energy: Potentially Transformative Technology Still Faces Fundamental Challenges, published by the Government Accountability Office.

Miguel Alessandro Lopez

At the University of Rhode Island, I initially enrolled as a candidate for an accelerated track to earn bachelor’s and master’s degrees in mechanical engineering, with a minor in nuclear engineering. My objective was to concentrate on reactor power design and join efforts to make nuclear energy safer, more efficient, and less stigmatized.

My plans changed after I attended a guest presentation on high-performance nuclear thermal propulsion (HP-NTP) led by Michael Houts, manager of NASA Nuclear Research at Marshall Space Flight Center. He posted his email address on one of the last slides, so I took a chance and contacted him about potential research opportunities and thesis work. As it turned out, that one little email ultimately led to four NASA-sponsored design projects at URI—two are complete, and two are in progress—as well as my thesis. My research has been on HP-NTP, specifically the centrifugal nuclear thermal rocket (CNTR) design. In that design, liquid uranium is heated to extremely high temperatures in a cylinder that is rotated between 5,000 and 7,000 revolutions per minute as liquid hydrogen passes through the center of the cylinder, where it is heated and expanded, exiting as a propellant while the liquid uranium is retained by centrifugal force.

A tiny 200-kWt reactor the Department of Energy says would be the first critical fast-spectrum circulating fuel reactor and the first fast-spectrum molten salt reactor (MSR) could be built and operated inside the Zero Power Physics Reactor (ZPPR) cell at Idaho National Laboratory’s Materials and Fuels Center (MFC). Details included in the Molten Chloride Reactor Experiment (MCRE) draft environmental assessment (EA)—released on March 16 for two weeks of public comment (later extended to four weeks, through April 14)—covered the potential environmental impacts associated with the development, construction, operation, and decommissioning of MCRE at INL, facilitated by the National Reactor Innovation Center (NRIC).

The Department of Energy’s Office of Science published a notice in the March 27 Federal Register calling for input on technological approaches to a Fusion Prototypic Neutron Source (FPNS) for materials irradiation research under DOE-SC’s Fusion Energy Sciences program, as well as partnership models that could accelerate the construction and delivery of the facility. The request for information (RFI) calls for responses by May 11.

The University of Missouri intends to build a new, larger research reactor to produce medical radioisotopes, announcing that it intends to issue a request for qualification/request for proposal (RFQ/RFP) in April to solicit interest from qualified parties to provide preliminary designs and industry partnerships for the new reactor project, called NextGen MURR.

The Department of Energy’s Oak Ridge National Laboratory (ORNL) and the U.K. Atomic Energy Authority (UKAEA) have formed a strategic research partnership to investigate how different types of materials behave under the influence of high-energy neutron sources. The five-year partnership was announced by ORNL and by the UKAEA on March 13.

NIST's Center for Neutron Research in Gaithersburg, Md. (Photo: NRC)

The Nuclear Regulatory Commission has authorized the restart of a test reactor at the National Institute of Standards and Technology, in Gaithersburg, Md. The reactor was shut down in February 2021 when a fuel element became damaged during startup and approach to full power. The incident violated the NRC’s fuel cladding temperature safety limit, although public health and safety were not affected, according to the agency.

The reactor is located at NIST’s Center for Neutron Research.

The Spallation Neutron Source (SNS) at the Department of Energy's Oak Ridge National Laboratory set a world record for accelerator-driven neutron research when its linear accelerator reached an operating power of 1.55 MW, improving on the facility’s original design capability of 1.4 MW. That higher power means more neutrons for researchers who use the facility for neutron scattering research to reach materials science advances, ORNL announced recently.

Dow and X-energy announced today that they have signed a joint development agreement (JDA) to demonstrate the first grid-scale advanced nuclear reactor at an industrial site in North America within a decade. As part of the agreement, Dow is now a subawardee under X-energy’s Advanced Reactor Demonstration Program (ARDP) Cooperative Agreement with the Department of Energy.

The Nuclear Regulatory Commission has issued its final safety evaluation report (SER) related to the operating license application for SHINE Technologies' large-scale medical isotope production facility, known as The Chrysalis, in Janesville, Wis. The SER documents the results of NRC staff’s technical and safety review of SHINE’s application. SHINE announced the NRC’s decision on February 27.

A record of decision concerning the proposed issuance of the operating license will be published by the NRC at a future date.

The Department of Energy’s Advanced Research Projects Agency–Energy (ARPA-E) announced $10 million in funding on February 17 for eight projects designed to determine whether low-energy nuclear reactions (LENR)—historically and sometimes disparagingly known as “cold fusion”—could someday be a carbon-free energy source. ARPA-E intends the funding to “break the stalemate” and determine if LENR holds any merit for future energy research.