Nuclear News

Researchers at the Department of Energy’s Princeton Plasma Physics Laboratory (PPPL) have developed a new model of how heat flows within plasmas. According to PPPL, the model could improve insights into the behavior of plasmas and may help engineers avoid the conditions that could lead to heat loss in future fusion facilities.

The Department of Energy is providing $50 million in a cost-sharing project with Exelon Generation to digitalize the control room at the company’s Limerick nuclear power plant, the department announced yesterday. Once implemented, the facility will house the first fully digital safety system upgrade at a U.S. nuclear power plant.

Svinicki

Kristine Svinicki, former chairman of the Nuclear Regulatory Commission, has joined the board of directors of Southern Company. Southern announced her election as an independent director on Monday. She joins the board’s Business Security and Resiliency Committee, as well as its Operations, Environmental, and Safety Committee.

“As the longest-serving member in the history of the U.S. Nuclear Regulatory Commission, Kristine brings to Southern Company a wealth of experience advising energy policy at the federal and state levels,” said Southern chairman, president, and chief executive officer Tom Fanning. “Kristine’s knowledge of and expertise in nuclear technologies will be invaluable as we pursue the full range of energy resources. Moreover, Kristine’s insight into the energy challenges of tomorrow places Southern Company in a prime position to serve customers, communities, employees, and stockholders well into the future.”

The expected early retirement of a massive coal plant in Pueblo County, Colo., has the county commissioners mulling small modular reactors as a power source replacement.

The plant in question is Xcel Energy’s three-unit Comanche Generating Station, Colorado’s largest single source of greenhouse gas emissions. In 2018, Xcel received approval from the Colorado Public Utilities Commission (PUC) to retire Units 1 and 2 in 2023 and 2025, respectively. And earlier this year, the company filed a proposal to close the much newer Unit 3 in 2039—three decades earlier than expected. (Xcel also plans to run the unit at only 33 percent, beginning in 2030.) Meanwhile, environmental groups have been pushing for the closure of Unit 3 by the end of the decade.

Richard Meserve

Nuclear power is an important tool in the response to climate change, and advanced reactors may offer advantages over existing plants in providing carbon-free generation at the scale necessary to respond to the existential challenge that climate change presents. The International Atomic Energy Agency is aggressively addressing issues related to the possible transition to advanced reactors. This letter is to urge a redoubling of effort by Member States to put in place the necessary capabilities to deal with the challenges that they present.

Many countries are responding to the threat of climate change by pledging to move toward a radical reduction of carbon emissions by 2050 or before. This will require a revolution in energy generation, and the transition must start many years before the target date. Given that nuclear power plants are long-lived investments that require many years to plan, construct, and incorporate on the grid, there is no time to waste in preparing for that changed world.

The Department of Energy’s National Nuclear Security Administration has issued a cooperative agreement worth $35 million to SHINE Technologies, based in Janesville, Wis., to support the commercial production of molybdenum-99, a critical isotope used in more than 40,000 medical procedures in the United States each day, including the diagnosis of heart disease and cancer.

International nuclear safeguards verification relies on a precise count of isotope particles collected on swipes during International Atomic Energy Agency inspections of nuclear facilities and isolated through a series of lengthy chemical separations that can take about 30 days to complete. On October 15, Oak Ridge National Laboratory—a member of the IAEA’s Network of Analytical Laboratories (NWAL)—announced that analytical chemists at the site have developed a faster way to measure isotopic ratios of uranium and plutonium collected on swipes, which could help IAEA analysts detect the presence of undeclared nuclear activities or material.

ARTMS, a Canadian producer of medical isotopes, announced that it has registered the cyclotron production of gallium-68 with the government of Canada, filing a Type 1 Master File with the Health Products & Food Branch of Health Canada. The Ga-68 radioisotope is used in nuclear medicine diagnostic procedures utilizing positron emission tomography (PET) imaging.

Craig Piercy

This month’s Nuclear News is dedicated to the people and technology that keep our nuclear energy facilities running. It’s one of the great untold stories of the modern industrial world: how a band of highly trained people have repeatedly and skillfully applied novel technology to keep decades-old nuclear plants running at peak performance. The feat itself can be hard for the uninitiated to fathom. It’s as if a 30-year-old pickup truck was still on the retail auto market and beating out brand-new models in Consumer Reports’ vehicle safety and reliability ratings.

Nuclear sustainability was the marquee topic at the 2021 ANS Utility Working Conference, held at Marco Island, Fla., in August. It was the first in-person meeting ANS has held since COVID emerged in early 2020. It was also my first UWC, so admittedly I have only a secondhand understanding of the “before” times.

The International Energy Agency released its flagship report, World Energy Outlook 2021, on October 13, “at a time when policymakers are contending with the impacts of both climate change and volatile energy markets” and ahead of the COP26 Climate Change Conference in Glasgow, which begins October 31. With a net-zero emissions by 2050 (NZE) scenario that calls for nuclear power capacity to almost double by 2050, the report acknowledges that rapid development of advanced nuclear technologies could expand opportunities for nuclear energy to provide low-carbon electricity, heat, and hydrogen.

The nuclear industry has historically relied on intermittent ultrasonic test and visual inspections of pressurized water reactor components to identify and manage degradation. While this reactive approach has proven to be effective, imagine a scenario in which the degradation could propagate throughout the reactor internals, making a more proactive measure necessary to avoid a major enterprise risk to the plant. Could a utility identify the onset of degradation within the reactor internals during plant operation? If so, could a repair be developed prior to the next refueling outage to prevent additional, cascading degradation? That is exactly the situation that Public Service Enterprise Group (PSEG) and Westinghouse engineers were able to navigate over the course of the 2019–2020 operating cycle at Salem Unit 1, resulting in a tremendous success for the plant and a historic landmark in the nuclear industry, while earning the team a 2021 Nuclear Energy Institute Top Innovative Practice (TIP) award.

A cutaway view of an EPR. (Image: EDF)

French utility giant Électricité de France has thrown its chapeau into the ring to be the large-reactor supplier for Poland’s embryonic nuclear power program, joining U.S.-based Westinghouse Electric Company, which has made concerted efforts this year to convince Poland to choose its AP1000 technology.

On Tuesday, EDF submitted a nonbinding preliminary offer to the Polish government for the construction of four to six EPR reactors, representing a total installed capacity of 6.6 to 9.9 GWe across two to three sites.

The pitch: The offer “covers all key parameters of the program, such as plant configuration, industrial scheme, plans for the development of the local supply chain, cost estimate, and schedule,” EDF said in a press release, adding that its proposal “aims at setting the principles for a Polish-French strategic partnership framework in support of Poland’s ambitious energy transition plan, aligned with the European carbon neutrality target.”

The United Kingdom has announced a shortlist of five sites as the potential future home of the U.K. Atomic Energy Authority’s (UKAEA) prototype fusion energy plant, the Spherical Tokamak for Energy Production (STEP). A final decision on the plant’s location is to be made by the U.K.’s secretary of state for business, energy and industrial strategy around the end of 2022.

The Canadian Nuclear Safety Commission has approved the renewal of the site preparation license for Ontario Power Generation’s Darlington new-build nuclear project. First granted in 2012, the license is now valid until October 11, 2031.

Here is a recap of industry happenings over the course of the past month:

ADVANCED REACTOR MARKETPLACE

Ukraine’s Energoatom signs deals for nuclear power exploration and deployment

Energoatom, the state-owned nuclear utility of Ukraine, and Westinghouse Electric Company have signed an agreement to bring Westinghouse AP1000 reactors to multiple sites in Ukraine. The signing took place at the U.S. Department of Energy headquarters in Washington, D.C., and was witnessed by Ukraine’s president Volodymyr Zelensky, U.S. energy secretary Jennifer Granholm, and Ukraine’s energy minister German Galushchenko.

In addition, Energoatom signed a memorandum of understanding with NuScale Power to explore small modular reactor deployment in Ukraine. Under the MOU, NuScale will support Energoatom’s examination of NuScale’s SMR technology, including a feasibility study for proposed project sites and the development of a project timeline and deliverables, cost studies, technical reviews, licensing and permitting activities, and project-specific engineering studies and design work.

Kevin Marsh, former chief executive officer and chairman of the board of directors of SCANA Corporation, has become the first person to be sentenced to prison for involvement in the 2017 collapse of the $10 billion Summer nuclear plant expansion project. Marsh was sentenced in federal court on October 7 and in state court on October 11.

The failure to complete the construction of two Westinghouse AP1000 reactors at the single-unit nuclear plant in Jenkinsville, S.C., cost ratepayers and investors billions, damaged the brands of then owners SCANA and Santee Cooper, and put some 6,000 people out of work.

Canada’s Bruce Power, operator of the eight-unit Bruce nuclear power plant in Kincardine, Ontario, is undertaking a series of environmental initiatives to help attain its goal, announced in March, to achieve net-zero greenhouse gas emissions from site operations by 2027.

The Minerals Council of Australia (MCA) last week released Small Modular Reactors in the Australian Context, an overview of SMRs, their potential role in Australia, and their likely operating costs.

The 36-page report, written by Australian nuclear energy advocate Ben Heard, takes a look at three of the most advanced SMR designs currently undergoing regulatory approval: NuScale’s Power Module, GE-Hitachi’s BWRX 300, and Terrestrial Energy’s Integral Molten Salt Reactor.

The Department of Energy has released its 2021 Climate Adaptation and Resilience Plan, outlining steps that it will take to ensure its facilities and operations adapt to and are increasingly resilient to the impacts of a changing climate. As announced by the White House last week , the DOE was one of more than 20 federal agencies to release climate change plans, which were developed in response to President Biden’s executive order on tackling the climate crisis, issued in January.

Some 200 Polish business leaders gathered in Warsaw earlier this month to discuss local supply chain opportunities with two U.S. companies hoping to become major players in Poland’s nascent civil nuclear power program.

The companies, Westinghouse and industry partner Bechtel, hosted their second nuclear supply symposium on October 5, touting Westinghouse’s AP1000 reactor technology.