ANS is committed to advancing, fostering, and promoting the development and application of nuclear sciences and technologies to benefit society.
Explore the many uses for nuclear science and its impact on energy, the environment, healthcare, food, and more.
Division Spotlight
Accelerator Applications
The division was organized to promote the advancement of knowledge of the use of particle accelerator technologies for nuclear and other applications. It focuses on production of neutrons and other particles, utilization of these particles for scientific or industrial purposes, such as the production or destruction of radionuclides significant to energy, medicine, defense or other endeavors, as well as imaging and diagnostics.
Meeting Spotlight
2024 ANS Annual Conference
June 16–19, 2024
Las Vegas, NV|Mandalay Bay Resort and Casino
Standards Program
The Standards Committee is responsible for the development and maintenance of voluntary consensus standards that address the design, analysis, and operation of components, systems, and facilities related to the application of nuclear science and technology. Find out What’s New, check out the Standards Store, or Get Involved today!
Latest Magazine Issues
Apr 2024
Jan 2024
Latest Journal Issues
Nuclear Science and Engineering
May 2024
Nuclear Technology
Fusion Science and Technology
Latest News
Glass strategy: Hanford’s enhanced waste glass program
The mission of the Department of Energy’s Office of River Protection (ORP) is to complete the safe cleanup of waste resulting from decades of nuclear weapons development. One of the most technologically challenging responsibilities is the safe disposition of approximately 56 million gallons of radioactive waste historically stored in 177 tanks at the Hanford Site in Washington state.
ORP has a clear incentive to reduce the overall mission duration and cost. One pathway is to develop and deploy innovative technical solutions that can advance baseline flow sheets toward higher efficiency operations while reducing identified risks without compromising safety. Vitrification is the baseline process that will convert both high-level and low-level radioactive waste at Hanford into a stable glass waste form for long-term storage and disposal.
Although vitrification is a mature technology, there are key areas where technology can further reduce operational risks, advance baseline processes to maximize waste throughput, and provide the underpinning to enhance operational flexibility; all steps in reducing mission duration and cost.
Thomas E. Michener, David R. Rector, Judith M. Cuta
Nuclear Technology | Volume 199 | Number 3 | September 2017 | Pages 350-368
Technical Paper | doi.org/10.1080/00295450.2017.1327253
Articles are hosted by Taylor and Francis Online.
The COBRA-SFS thermal-hydraulic code has been incorporated into the Used Nuclear Fuel-Storage, Transportation & Disposal Analysis Resource and Data System tool as a module devoted to spent-fuel-package thermal analysis. COBRA-SFS has been extensively validated and widely applied to thermal-hydraulic analysis of a large range of spent-fuel storage systems. Instead of recapping that long and detailed history, this paper summarizes the most significant and unique verification and validation of COBRA-SFS, which consists of comparison of code temperature predictions to experimental data obtained in the Test Area North Facility at the Idaho National Laboratory in the 1980s and early 1990s. These data were obtained as part of a program undertaken by the U.S. Department of Energy Office of Civilian Radioactive Waste Management for thermal performance testing of commercial spent-fuel storage cask designs. In total, four casks were tested, and all tests were performed with Westinghouse 15×15 pressurized water reactor spent fuel from the Surry or Turkey Point reactors. COBRA-SFS code results and experimental data comparisons are shown only for the CASTOR-V/21 and the TN-24P casks. CASTOR-V/21 was loaded with the highest decay heat load tested in this program, with individual assembly decay heat values up to 1.83 kW. This effectively bounds storage conditions currently contemplated for high-heat-load systems with test conditions reaching fuel cladding temperatures that approached and in some cases exceeded 400°C, the current regulatory limit for peak cladding temperature in dry storage. TN-24P, with a decay heat load of 20.5 kW, provides comparisons with experimental data that represent a realistic upper bound on typical dry storage initial conditions in independent spent fuel storage installations around the country. The consistency and accuracy of the COBRA-SFS temperature predictions in comparison to the measured data from these casks show that the code appropriately predicts the thermal-hydraulic and heat transfer behavior of these systems. The results presented here provide an excellent illustration of the capability of the COBRA-SFS code to correctly capture all three modes of heat transfer (thermal radiation, conduction, and convection) and the internal circulation of the backfill gas within a spent-fuel package in horizontal or vertical orientation.