Volume 70

GPEC: A Real-Time–Capable Tokamak Equilibrium Code

Markus Rampp, Roland Preuss, Rainer Fischer, ASDEX Upgrade Team

Generic Magnetic Fusion Reactor Revisited

John Sheffield, Stanley L. Milora

Catalyzed D-D Stellarator Reactor

John Sheffield, Donald A. Spong

Fishbone Modes in Plasmas with Dual Neutral Beam Injection Heating

Hongda He, J. Q. Dong, Zhixiong He, K. Zhao

Design of Control System for Suppression of Neoclassical Tearing Modes with Electron Cyclotron Heating and Current Drive on EAST

Y. Zhang, X. G. Wang, X. J. Wang, H. C. Hu, Y. Liu, A. Ti, L. Q. Xu, X. D. Zhang, EAST Team

Growth of Axisymmetric Instabilities in ASDEX Upgrade

T. Sehmer, K. Lackner, E. Strumberger, E. Fable, O. Kardaun, P. McCarthy, ASDEX Upgrade Team

Linear Instability Analysis of Magnetohydrodynamic Flow in a Rectangular Duct with Side Walls of Unsymmetrical Conductivity

Chan Liu, Ming-Jiu Ni, Nian-Mei Zhang

Tritium Migration to the Surfaces of Type 316 Stainless Steel; Aluminum 6061; and Oxygen-Free, High-Conductivity Copper

M. Sharpe, W. T. Shmayda, W. U. Schröder

Outline Design of ITER Radial X-Ray Camera Diagnostic

L. Hu, K. Chen, Y. Chen, S. Li, J. Shen, X. Sheng, L. Niu, Y. Cheng, J. Zhao

Update 2015 on Target Fabrication Requirements for NIF Layered Implosions, with Emphasis on Capsule Support and Oxygen Modulations in GDP

S. W. Haan, D. S. Clark, S. H. Baxamusa, J. Biener, L. Berzak Hopkins, T. Bunn, D. A. Callahan, L. Carlson, T. R. Dittrich, M. J. Edwards, B. A. Hammel, A. Hamza, D. E. Hinkel, D. D. Ho, D. Hoover, W. Hsing, H. Huang, O. A. Hurricane, M. A. Johnson, O. S. Jones, A. L. Kritcher, O. L. Landen, J. D. Lindl, M. M. Marinak, A. J. MacKinnon, N. B. Meezan, J. Milovich, A. Nikroo, J. L. Peterson, P. Patel, H. F. Robey, J. D. Salmonson, V. A. Smalyuk, B. K. Spears, M. Stadermann, S. V. Weber, J. L. Kline, D. C. Wilson, A. N. Simakov, A. Yi

Understanding the Critical Parameters of the PAMS Mandrel Fabrication Process

Suhas Bhandarkar, Reny Paguio, Fred Elsner, Denise Hoover, Abbas Nikroo, Chris Guido

Tumble Polishing of Faster-Coated Glow Discharge Polymer Capsules

N. G. Rice, K. C. Chen, D. E. Hoover, A. M. Garcia, A. Nikroo, N. Dorsano

Surface Modification of ICF Target Capsules by Pulsed Laser Ablation

L. C. Carlson, M. A. Johnson, T. L. Bunn

Planarization of Isolated Defects on ICF Target Capsule Surfaces by Pulsed Laser Ablation

Noel Alfonso, Lane C. Carlson, Thomas L. Bunn

Gas Retention in Multilayer Alternate Ablator Capsules

Claudia M. Shuldberg, Michael E. Schoff, Hongwei Xu, Noel L. Alfonso, Erwin Castillo, Jay W. Crippen, Martin L. Hoppe Sr., Michael P. Farrell

Growth of a Solid D-T Crystal from the Liquid Inside Inertial Confinement Fusion Targets

D. R. Harding, D. Whitaker, C. Fella

Supercooling of Hydrogen on Template Materials to Deterministically Seed Ignition-Quality Solid Fuel Layers

S. J. Shin, L. A. Zepeda-Ruiz, J. R. I. Lee, S. H. Baxamusa, R. Dylla-Spears, T. Suratwala, B. J. Kozioziemski

Technique for Forming Solid D₂ and D-T Layers for Shock Timing Experiments at the National Ignition Facility

J. D. Sater, F. Espinosa-Loza, B. Kozioziemski, E. R. Mapoles, R. Dylla-Spears, J. W. Pipes, C. F. Walters

Zinc-Nucleated D₂ and H₂ Crystal Formation from Their Liquids

T. P. Bernat, N. Petta, B. Kozioziemski, S. J. Shin, D. R. Harding

Effect of a Surfactant on the Electric-Field Assembly of Oil-Water Emulsions for Making Foam Targets

B. P. Chock, T. B. Jones, D. R. Harding

The Effects of a Surfactant on the Operation of T-Junctions for Mass-Producing Foam Targets

N. D. Viza, M. H. Romanofsky, M. J. Moynihan, D. R. Harding

Development of Hierarchical, Tunable Pore Size Polymer Foams for ICF Targets

Christopher E. Hamilton, Matthew N. Lee, A. Nicholas G. Parra-Vasquez

Process Development and Micro-Machining of MARBLE Foam-Cored Rexolite Hemi-Shell Ablator Capsules

Randall B. Randolph, John A. Oertel, Derek W. Schmidt, Matthew N. Lee, Brian M. Patterson, Kevin C. Henderson, Christopher E. Hamilton

Specific Adaptations of Mechanical Machining Processes for Laser Target Manufacturing

J. Andre, R. Botrel, J. Schunck, A. Pinay, C. Chicanne, M. Theobald

Sinusoidal Ripples Micromachining on CHx Ablator for Hydrodynamics Growth Experiments

I. Geoffray, J. Andre, R. Bourdenet, J. Schunck, C. Chicanne, M. Theobald

Linear Sine Wave Profiling to Machine Instability Targets

D. W. Schmidt, J. I. Martinez

Machining of Two-Dimensional Sinusoidal Defects on Ignition-Type Capsules to Study Hydrodynamic Instability at the National Ignition Facility

E. M. Giraldez, M. L. Hoppe Jr., D. E. Hoover, A. Q. L. Nguyen, N. G. Rice, A. M. Garcia, H. Huang, M. P. Mauldin, M. P. Farrell, A. Nikroo, V. Smalyuk

A Flexure-Based Mechanism for Precision Adjustment of National Ignition Facility Target Shrouds in Three Rotational Degrees of Freedom

K.-J. Boehm, C. R. Gibson, J. R. Hollaway, F. Espinosa-Loza

Automation of NIF Target Fabrication

L. C. Carlson, H. Huang, N. Alexander, J. Bousquet, M. Farrell, A. Nikroo

Additive Manufacturing Capabilities Applied to Inertial Confinement Fusion at Los Alamos National Laboratory

Tana Cardenas, Derek W. Schmidt, Dominic S. Peterson

Direct Writing Target Structures by Two-Photon Polymerization

L. J. Jiang, J. H. Campbell, Y. F. Lu, T. Bernat, N. Petta

Fabrication of Micron-Scale Cylindrical Tubes by Two-Photon Polymerization

T. P. Bernat, J. H. Campbell, N. Petta, I. Sakellari, S. Koo, J.-H. Yoo, C. Grigoropoulos

Development of Indirectly Driven Shock Tube Targets for Counter-Propagating Shear-Driven Kelvin-Helmholtz Experiments on the National Ignition Facility

D. Capelli, D. W. Schmidt, T. Cardenas, G. Rivera, R. B. Randolph, F. Fierro, E. C. Merritt, K. A. Flippo, F. W. Doss, J. L. Kline

Design and Engineering of a Target for X-Ray Thomson Scattering Measurements on Matter at Extreme Densities and Gigabar Pressures

K.-J. Boehm, N. Hash, D. Barker, T. Döppner, M. P. Farrell, P. Fitzsimmons, D. Kaczala, D. Kraus, B. Maranville, M. Mauldin, P. Neumayer, K. Segraves

Constitutive Models for the Viscoelastic Behavior of Polyimide Membranes at Room and Deep Cryogenic Temperatures

Suhas Bhandarkar, Jacob Betcher, Ryan Smith, Bruce Lairson, Travis Ayers

Phenomenological Model for Gold-Copper Electrodeposition: Application to Thick Coatings

F. Durut, R. Botrel, E. Brun, S. Le Tacon, C. Chicanne, O. Vincent-Viry, M. Theobald, V. Vignal

Rare-Earth Thin-Film Deposition and Oxidation Study

S. Le Tacon, A. Brodier, C. Chicanne, M. Theobald

Fabrication, Characterization, and Modeling of Comixed Films for NXS Calibration Targets

Javier Jaquez, Mike Farrell, Haibo Huang, Abbas Nikroo, Sean Regan, Kevin Fournier, Maria Alejandra Barrios Garcia, Frederic Perez

Improvements in Fabrication of Elastic Scattering Foils Used to Measure Neutron Yield by the Magnetic Recoil Spectrometer

H. G. Reynolds, M. E. Schoff, M. P. Farrell, M. Gatu Johnson, R. M. Bionta, J. A. Frenje

Fabrication of Large-Area Glow Discharge Polymer–Deposited Foils

M. E. Schoff, E. R. Castillo, N. M. Ravelo, M. P. Farrell

Quantitative Defect Analysis of Ablator Capsule Surfaces Using a Leica Confocal Microscope and a High-Density Atomic Force Microscope

H. Huang, L. C. Carlson, W. Requieron, N. Rice, D. Hoover, M. Farrell, D. Goodin, A. Nikroo, J. Biener, M. Stadernann, S. W. Haan, D. Ho, C. Wild

Multimachine Data–Based Prediction of High-Frequency Sensor Signal Noise for Resistive Wall Mode Control in ITER

Yueqiang Liu, S. A. Sabbagh, I. T. Chapman, S. Gerasimov, Y. Gribov, T. C. Hender, V. Igochine, M. Maraschek, G. Matsunaga, M. Okabayashi, E. J. Strait

Neoclassical Transport and Iota Scaling in the TJ-II Stellarator

F. Castejón, A. J. Rubio-Montero, A. López-Fraguas, E. Ascasíbar, R. Mayo-García

Relaxation of Surface Tension Waves on a Liquid Metal Mirror for a Fast-Ignition Laser Fusion Plant

Takayoshi Norimatsu, Oleg Kotyaev, Yoshinori Shimada, Shinri Kurahashi, Shinji Motokoshi, Katsuhiro Mikami, Kei Sasaki, Takahisa Jitsuno, Kohei Yamanoi, Hiroyuki Furukawa, Tomoaki Kunugi

The Design and Manufacture of the Neutral Beam Injection Thermal Shield for the EAST Tokamak

Changle Liu, Damao Yao, Lei Li, Jie Zhang, Hao Yang, Yang Qiu, Xiang Gao

Analysis of Energy Deposition on Ion Source Components of EAST Neutral Beam Injector

Xiang Li, Yongjian Xu, Chundong Hu, Ling Yu, Yu Chen, NBI Group

Main Features of the Technology for Air Detritiation in Scrubber Column

M. Rozenkevich, Yu. Pak, S. Marunich, A. Bukin, A. Ivanova, A. Perevezentsev, L. Lepetit

Multidimensional Heat Transfer and Flow Boiling Curve Measurements in Single-Side-Heated Flow Channels

R. D. Boyd, A. M. May, P. Cofie, R. Martin

Effects of Internal Bremsstrahlung on Tritium Profile Reconstruction in BIXS Measurements

Zhilin Chen, Masao Matsuyama, Shinsuke Abe, Shuming Peng