Research & Applications

Edward Stones

At my company, Dow, we understand and embrace our responsibility to reduce global carbon emissions. With that said, the challenge to decarbonize is significant but achievable. To give you a sense of the scale required for us to decarbonize in order to make our products, we produce more than 7 GW of power and steam that fire more than 50 gas and steam turbines and boilers. Moreover, we have more than 100 furnaces at 30 major manufacturing sites worldwide.

Dow has already reduced our greenhouse gas emissions by 15 percent since 2005, and we are on track to reduce emissions another 15 percent by the end of the decade on our path to carbon neutrality by 2050. Our use of clean energy has contributed significantly to our current progress, as we are one of the top 20 users of renewable energy among global corporations, having secured more than 900 MW of renewable power. While we will continue to pursue renewable energy, there’s a limitation in the ability for renewables to support our decarbonization efforts.

Ignition and net gain at Lawrence Livermore National Laboratory’s National Ignition Facility (NIF) in December 2022 focused global attention on the prospects of inertial fusion energy (IFE). First Light Fusion and the U.K. Atomic Energy Authority (UKAEA) acknowledged the achievement as they announced plans on January 25 to design and build a demonstration facility known as Machine 4 at UKAEA’s Culham Campus in Oxford, U.K., using First Light’s “projectile approach” to IFE. Construction is expected to begin in 2024, and operations are “likely to commence” in 2027.

The Department of Energy’s commitment to breaking down market barriers with initiatives, programs, and access to facilities is making it simpler and more efficient than ever for industry to partner with national laboratories. It is especially timely, as the country continues to face evolving security, economic, and clean energy challenges. Partnering opportunities via the DOE’s Cooperative Research and Development Agreements (CRADAs) and Strategic Partnership Projects (SPPs) are particularly prevalent in the commercial nuclear community and have seen a tremendous amount of funding and support dedicated to advancing the development, demonstration, and deployment of new reactor technologies.

NASA and the Defense Advanced Research Projects Agency (DARPA) have announced they will collaborate on plans to launch and test DARPA’s Demonstration Rocket for Agile Cislunar Operations (DRACO). DARPA has already worked with private companies on the baseline design for a fission reactor and rocket engine—and the spacecraft that will serve as an in-orbit test stand—and has solicited proposals for the next phase of work. Now NASA is climbing on board, deepening its existing ties to DRACO’s work in nuclear thermal propulsion (NTP) technology—an “enabling capability” required for NASA to meet its Moon to Mars Objectives and send crewed missions to Mars. NASA and DARPA representatives announced the development at the American Institute of Aeronautics and Astronautics SciTech Forum in National Harbor, Md., on January 24.

The Nuclear Innovation Alliance (NIA) released a new report last week titled Transforming the U.S. Department of Energy: Paving the Way to Commercialize Advanced Nuclear Energy, which gives recommendations for how the Department of Energy (DOE) can help advanced nuclear power technologies cross the finish line to commercialization. It calls for a “whole-of-government and whole-of-society effort dependent on successful public-private partnerships.”

The NIA report acknowledges that boosting energy security and meeting decarbonization goals will require at least double the domestic nuclear energy capacity that is on line today. But the nuclear industry is highly complex, and its supply chain is atrophied. The success of advanced nuclear technology will depend on careful collaboration and planning to bolster a new supply chain.

“Star Power” is the name 60 Minutes producers gave their interpretation of the recent experiment at the National Ignition Facility (NIF) that achieved fusion ignition and net gain. Views from inside Lawrence Livermore National Laboratory captured by TV cameras and aired Sunday, January 15—of some of NIF’s 192 lasers, banks of capacitors, target assembly labs, and even the remains of the target assembly blasted in the December 5 breakthrough—are well worth the watch for those of us who are unlikely to visit the site in person.

The use of small modular reactors would be an excellent, cost-effective way to recharge electric heavy-duty vehicles (HDVs), such as trucks, according to a recent study published in Applied Energy. The Idaho National Laboratory–funded study was conducted by researchers at the University of Michigan.

A “resurgence of interest” in nuclear propulsion for space missions is described in a new article authored by science writer Jon Kelvey for the American Institute of Aeronautics and Astronautics’ (AIAA’s) Aerospace America website. The focus of Kelvey’s article is nuclear thermal propulsion (NTP), which, according to the Department of Energy, “could significantly reduce travel times and carry greater payloads than today’s top chemical rockets­—giving humans a great chance of exploring deep space.”

The Department of Energy’s Office of Science announced $2.3 million in funding on January 17 for 10 fusion energy projects that will allow private companies to work with national laboratories to address specific challenges in fusion energy development. Seven private companies and seven national laboratories are represented in the 10 projects selected for funding, provided through the INFUSE (Innovation Network for Fusion Energy) program. The second-round fiscal year 2022 awards follow a first round of 18 project awards announced in July 2022.

Researchers at Idaho National Laboratory have completed initial testing on a newly developed fuel test capsule that is expected to provide crucial performance data for sodium-cooled fast reactors. The Department of Energy announced on January 12 that the series of fuel testing experiments being carried out now at INL’s Transient Reactor Test Facility (TREAT) was developed through a joint project between the United States and Japan.

The U.K. Atomic Energy Authority (UKAEA) announced on January 12 that the South Oxfordshire District Council Planning Committee approved a planned fusion energy demonstration project at UKAEA’s Culham Campus. UKAEA and General Fusion, the magnetized target fusion company that designed the demo plant, announced that same day that construction will begin this summer, with commissioning planned for 2026 and full operations by early 2027.

Nuclear medicine company NorthStar Medical Radioisotopes announced that it has successfully produced molybdenum-99 at its recently completed accelerator production facility at its Beloit, Wis., campus. According to NorthStar, the event marks a major milestone in advancing the company’s proprietary electron accelerator technology for the non-uranium–based production of the critical medical radioisotope.

ITER’s machine assembly phase began about two and a half years ago. Now, staff are reversing some of that assembly work to make needed repairs. According to a news article published by the ITER Organization on January 9, ITER is “facing challenges common to every industrial venture involving first-of-a-kind components.” Over one year after problems were first detected and less than two months after they were made public in late November, tests and analysis are producing a clearer picture of necessary repairs to the tokamak’s thermal shield panels and vacuum vessel sectors.

“There is no scandal here,” said ITER director general Pietro Barabaschi. “Such things happen. I've seen many issues of the kind, and much worse.”

Scientists are searching for new materials to advance the next generation of nuclear power plants. In a recent study, researchers at the Department of Energy’s Argonne National Laboratory showed how artificial intelligence could help pinpoint the right types of molten salts, a key component for advanced nuclear reactors.

On December 5, researchers at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory achieved fusion energy breakeven. It was a gain for stockpile stewardship that also—as headlines gushed prior to the Department of Energy’s December 13 announcement—boosted the prospects of inertial fusion energy (IFE). The timing of the landmark achievement may have been especially welcome to private fusion companies with inertial or hybrid magneto-inertial confinement concepts, because it occurred as the DOE was getting ready to consider applications for $50 million in funding for fusion pilot plant design work.

The Post-Industrial Midwest and Appalachia (PIMA) Nuclear Alliance hosted its third workshop December 8—9 at Pennsylvania State University’s Digital Foundry at New Kensington. The alliance, which consists of Penn State and several academic, industrial, and national lab partners, was formed in May 2022 to harness carbon-free energy while educating and training the future energy workforce. Previous workshops were held in June and October this year.

Microreactor technology: The major focus of the alliance is innovation in microreactor technology and other advanced nuclear reactor technologies in the Midwest and Appalachia regions, with the overall goal of furthering the decarbonization of industries.

It’s official: Early in the morning on December 5 at Lawrence Livermore National Laboratory’s National Ignition Facility (NIF), the laser-triggered implosion of a meticulously engineered capsule of deuterium and tritium about the size of a peppercorn yielded, for the first time on Earth, more energy from a fusion reaction than was delivered to the capsule. The input of 2.05 megajoules (MJ) to the target heated the diamond-shelled, spherical capsule to over 3 million degrees Celsius and yielded 3.15 MJ of fusion energy output. The achievement was announced earlier today by officials and scientists representing the Department of Energy and its National Nuclear Security Administration, the White House, and LLNL during a livestreamed event.

LA GRANGE PARK, Illinois – American Nuclear Society (ANS) President Steven Arndt and ANS CEO and Executive Director Craig Piercy issued the following statement:

"The American Nuclear Society and the Fusion Energy Division of the American Nuclear Society congratulate the National Ignition Facility (NIF) team at Lawrence Livermore National Laboratory for their achievement in reaching the scientific energy breakeven milestone for fusion ignition.

A study published recently in the American Physical Society journal Physical Review C reveals new findings about the strong nuclear force, the mysterious fundamental force that holds together the protons and neutrons of the atomic nucleus. Experiments conducted at Argonne National Laboratory have shown how the round, heavy nuclei of the nickel-64 isotope (containing 28 protons and 36 neutrons, making it the heaviest stable Ni isotope) changed into one of two shapes—either like a doorknob or a football—depending on the amount of energy exerted on it. A summary of the research on the Phys.org website compares the nuclei shape change to popcorn kernels changing shape when heated in a microwave.

NorthStar Medical Radioisotopes has completed construction and all equipment installation at its new facility in Beloit, Wis., to produce the medical radioisotope molybdenum-99 without the use of high-enriched uranium, the Department of Energy’s National Nuclear Security Administration announced last week.