Unit 1 at South Korea’s Shin-Hanul nuclear power plant entered commercial operation last week, Korea Hydro & Nuclear Power has announced. The 1,340-MWe APR-1400—designed by KHNP and parent firm Korea Electric Power Company—achieved initial criticality on May 22 of this year and was connected to the grid on June 9.

A Westinghouse-Bechtel team, France’s EDF, and Korea Hydro & Nuclear Power have all submitted their initial bids for securing the contract to build a fifth reactor at the Czech Republic’s Dukovany plant, Czech utility ČEZ has announced.

Westinghouse Electric Company has announced the signing of a long-term technology license agreement with Swedish engineering services firm Studsvik to develop a metals recycling and treatment facility at Westinghouse’s Springfields site.

Located near Preston, Lancashire, in northwestern England, Springfields is the United Kingdom’s only site for nuclear fuel manufacturing, supplying all its advanced gas-cooled reactor fuel. According to Westinghouse, Springfields fuel is responsible for about 32 percent of Britain’s low-carbon electricity generation. In addition, the site exports other nuclear fuel products to customers around the globe.

Westinghouse Electric Company and Finnish energy company Fortum have jointly announced the signing of a long-term partnership to develop, license, and supply VVER-440 fuel to Finland’s two-unit Loviisa nuclear power plant.

The Nuclear Regulatory Commission is seeking public comment on the scope of its supplemental environmental impact statement (SEIS) concerning Dominion Energy’s subsequent license renewal (SLR) application for North Anna-1 and -2, the agency announced earlier this week.

Morawiecki

Poland has chosen Westinghouse Electric Company to supply the reactors for its initial nuclear power plant, as the Central European nation seeks to lessen its dependence on domestic coal and Russian imports for its energy supply. On Friday, Polish prime minister Mateusz Morawiecki announced the decision on Twitter, confirming last week’s reports that Westinghouse’s AP1000 technology was the government’s likely choice.

“A strong [Polish-American] alliance guarantees the success of our joint initiatives,” Morawiecki tweeted. “After talks with [vice president Kamala Harris and energy secretary Jennifer Granholm], we confirm our nuclear energy project will use the reliable, safe technology of [Westinghouse].”

Competing with the American firm for the job were Électricité de France and Korea Hydro & Nuclear Power. In October 2021, EDF submitted an offer to build four to six EPRs in Poland, while KHNP offered in April of this year to construct six APR1400 units.

Poland’s deputy prime minister Jacek Sasin and U.S. energy secretary Jennifer Granholm meet in Washington on October 23. (Photo: gov.pl)

Following a meeting in Washington, D.C., on Sunday with secretary of energy Jennifer Granholm, Polish deputy prime minister Jacek Sasin told reporters that his nation is close to choosing the reactor supplier for its initial nuclear plant project, adding, according to Bloomberg, “There is a big chance that we will finally pick Westinghouse.”

And in a news release on the meeting from the Polish government, Sasin is quoted as saying, “The massive energy crisis that is currently affecting us means that we must quickly make decisions on building the country’s energy security based on new, clean, cheap, and reliable sources, and such a source is nuclear energy. We want the decisive decisions to be made as soon as possible. That is why we asked [Granholm] for a meeting, during which we will clarify all the issues that remain to be clarified.”

Georgia Power announced this morning that fuel loading at Vogtle-3 has commenced, marking an important milestone on what has proved to be a long and bumpy road to startup and commercial operation of the first new nuclear power reactors to be built in the United States in more than three decades. (Major work on the Vogtle-3 and -4 project began in 2012, with a price tag of $14 billion and scheduled unit start dates of 2016 and 2017. The project’s total cost is now expected to exceed $30 billion.)

Five years after bankruptcy, Pennsylvania-based Westinghouse is being sold again, this time with a 49 percent share going to Cameco Corp., the front-end uranium mining, milling, and conversion company headquartered in Saskatchewan, Canada. Cameco and Brookfield Business Partners, based in Toronto, Ontario, announced the deal yesterday. Once it closes as expected, in the second half of 2023, Brookfield Renewable Partners and other Brookfield institutional partners will own a 51 percent interest in a consortium with Cameco.

Westinghouse Electric Company and Ansaldo Nucleare have announced the signing of a cooperation agreement to develop a next-generation nuclear power plant based on lead-cooled fast reactor (LFR) technology.

Wholly owned by Italy’s Ansaldo Energia, Ansaldo Nucleare is involved in the production of high-tech nuclear components; the design and construction of new builds; decommissioning; and advanced research on radwaste management, fusion, fourth-generation plants, and small modular reactors. In addition, the firm played a significant role in the development of such Generation III technologies as Westinghouse’s AP600 and AP1000 reactors.

Under the agreement, Westinghouse and Ansaldo Nucleare will advance a common design to maximize synergies; combine experience in design, testing, and licensing; and align respective partner and supply-chain organizations.

Vistra Corporation announced yesterday that it is seeking 20-year life extensions for its Comanche Peak reactors and has submitted an application for license renewals to the Nuclear Regulatory Commission.

Operated by Vistra subsidiary Luminant and located in Glen Rose, Texas, Comanche Peak is home to two Westinghouse-supplied pressurized water reactors. The 1,218-MWe Unit 1 began commercial operation in August 1990, with the 1,207-MWe Unit 2 joining in August 1993. The original 40-year licenses for Units 1 and 2 expire in February 2030 and February 2033, respectively.

Westinghouse's eVinci microreactor (Image: Westinghouse)

Westinghouse Electric Company has signed a service agreement with the Canadian Nuclear Safety Commission (CNSC) to bring the eVinci microreactor closer to commercialization, the company announced Tuesday. The agreement initiates a vendor design review (VDR)—a prelicensing technical assessment of a company’s reactor technology.

The objective of a VDR, according to the CNSC, is to verify the acceptability of a nuclear power plant design with respect to Canadian nuclear regulatory requirements and expectations, as well as Canadian codes and standards. The review also aims to identify fundamental barriers to licensing a new design in Canada and to assure that a resolution path exists for any design issues identified.

Westinghouse Electric Company continues its aggressive campaign to become the large reactor supplier for Poland’s planned nuclear power facilities, recently signing memoranda of understanding with 22 firms in the Central European nation.

The American company, with its AP1000 design, is one of three suppliers vying to provide the units for the first Polish nuclear plant project, the other contenders being Électricité de France and Korea Hydro & Nuclear Power.

The MOUs were signed last week in the presence of U.S. ambassador to Poland Mark Brzezinski.

Clean energy technology firm Bloom Energy has announced plans to install a 240-kW electrolyzer at Xcel Energy’s Prairie Island plant in Red Wing, Minn., to demonstrate the benefits of producing hydrogen with nuclear power. (One of Xcel’s two nuclear plants, Prairie Island houses twin 550-MWe pressurized water reactors.)

The Nuclear Regulatory Commission yesterday announced that it has issued a renewed license for Westinghouse Electric Company’s Columbia Fuel Fabrication Facility (CFFF), authorizing operations at the plant for another 40 years—through September 12, 2062.

Located in Hopkins, S.C., the CFFF manufactures fuel rods for use in commercial nuclear reactors. According to Westinghouse, 10 percent of the nation’s electricity comes from the fuel manufactured at the facility.

ENUSA’s president and CEO Mariano Moreno (left) and Westinghouse’s nuclear fuel president Tarik Choho shake hands on their latest partnership. (Photo: Westinghouse)

Westinghouse Electric Company and Madrid-based ENUSA intend to collaborate on VVER-440 fuel fabrication, the American firm announced last week at the World Nuclear Association’s World Nuclear Symposium.

The partnership, Westinghouse stated in a September 8 release, “will build on decades of performance delivering a Western alternative to Russian fuel in the European market.” There are currently 16 nuclear power reactors in Europe operating with VVER-440 fuel, and utilities in the region are actively looking for alternatives to Russian-supplied fuel for those units, according to the release.

Signers’ language: “We have a mutual interest in partnering in VVER-440 fuel manufacturing and potentially other related areas,” said Tarik Choho, Westinghouse’s president of nuclear fuel. “With our proven track record supplying for VVER reactors, we stand ready to support even greater energy security for our customers and European countries. We look forward to strengthening our partnership with ENUSA and leveraging their valuable experience in this field.”

A bill to extend operations at California’s Diablo Canyon nuclear plant beyond 2025 debuted last evening in the California legislature. Lawmakers have until Wednesday—the end of the current legislative session—to vote on the measure.

Coauthored by State Sen. Bill Dodd (D., Napa) and Assemblymember Jordan Cunningham (R., San Luis Obispo), Senate Bill 846 includes a $1.4 billion forgivable loan to Pacific Gas and Electric (PG&E), the plant’s owner and operator, matching the amount in the August 12 proposal from Calif. Gov. Gavin Newsom. Instead of Newsom’s proposed option for a 10-year life extension for the facility, however, SB 846 would keep the plant running for an additional five years only.

The Nuclear Regulatory Commission issued its final environmental impact statement (EIS) for the proposed license renewal of Westinghouse Electric’s Columbia Fuel Fabrication Facility (CFFF) in Hopkins, S.C, on July 29, recommending renewal for a 40-year term.

The Nuclear Regulatory Commission has directed its staff to issue a final rule certifying NuScale Power’s small modular reactor design for use in the United States, the agency announced last Friday.

Certification of the Portland, Ore.–based SMR developer’s design will become effective 30 days after publication of the rule in the Federal Register. The design will be incorporated as Appendix G to 10 CFR Part 52, Licenses, Certifications, and Approvals for Nuclear Power Plants.

Westinghouse Electric Company was awarded an engineering contract with Norsk Nukleær Dekommisjonering (NND) to plan the decommissioning of the country’s two nuclear research reactors, located in Halden and Kjeller. The three-year agreement includes options up to six years and is valued at up to $100 million (NOK 1 billion).