France’s Électricité de France and Polish renewable energy trader Respect Energy have signed a cooperation agreement to develop nuclear power projects in Poland based on EDF’s NUWARD small modular reactor technology, the companies jointly announced last Friday.

Westinghouse Electric and Framatome have signed agreements with Kozloduy NPP—the eponymous operator of Bulgaria’s only nuclear power facility—to fabricate and deliver fuel for the site’s two operating reactors. Westinghouse will provide the fuel for Unit 5 under a 10-year contract inked on December 22, while Framatome will supply Unit 6 under a December 30 preliminary deal. First deliveries of fuel from Westinghouse and Framatome are expected in 2024 and 2025, respectively.

The two agreements, according to the Bulgarian News Agency, “are part of an effort to diversify energy supplies to Bulgaria and do away with the country’s dependence on Russian energy resources.” In November, the Bulgarian National Assembly approved 156–47 a resolution tasking the country’s Council of Ministers with licensing non-Russian nuclear fuel for Kozloduy.

The Steam Generating Team (SGT)—a joint venture of Framatome and United Engineers & Constructors Inc.—has completed a project to replace the Unit 2 steam generators at the Watts Bar nuclear plant, Framatome announced last week.

Watts Barr’s owner and operator, the Tennessee Valley Authority, awarded Framatome the contract for the work in early 2020.

An international collaboration between Bruce Power, Isogen (a Kinectrics and Framatome company), and ITM Isotope Technologies Munich SE (ITM) announced they have begun commercial production of lutetium-177 using Unit 7 of the Bruce nuclear power plant in Kincardine, Ontario. According to the companies, this marks the first time a commercial power reactor has been used to commercially produce short-lived medical radioisotopes.

Framatome has completed the second 18-month cycle of its GAIA Protect Enhanced Accident Tolerant Fuel (EATF) technology at Vogtle’s Unit 2 in Waynesboro, Ga. Inspections afterward revealed that the full-length chromium-coated fuel rods maintained their original characteristics, while the chromia-enhanced pellets operated as designed during 36 months of reactor operation.

Youngkin

Speaking earlier this week at the launch ceremony for Virginia’s 2022 Energy Plan, Gov. Glenn Youngkin called for an all-of-the-above approach, stressing the need for “an achievable and dynamic energy plan that provides for abundant, reliable, affordable, and clean energy.” He also left no doubt as to where nuclear power fits into that plan.

“We have to be all in [for] nuclear energy in Virginia,” Youngkin declared, addressing an audience of lawmakers, workers donning hard hats, and business executives at a power transformer manufacturing facility in Lynchburg. “When it comes to reliability, affordability, when it comes to clean power, when it comes to the abundant nature of growing power demand, absolutely nothing beats nuclear energy. It is the baseload of all baseloads. And Virginia is uniquely positioned to lead.”

Teollisuuden Voima Oyj (TVO), owner and operator of the Olkiluoto nuclear power plant in Finland, has resumed Olkiluoto-3’s test production phase, following completion of maintenance and repair work at the new reactor’s turbine island, the company announced this week.

TVO had announced in June a delay to the unit’s commercial start of some three months—from September to December—after material that had detached from the steam guide plates was found in the turbine’s steam reheater in May, necessitating repair work and a halt to testing.

An international collaboration between Bruce Power, Isogen (a joint venture of Kinectrics and Framatome), and ITM Isotope Technologies Munich SE, announced a milestone marking the first time that lutetium-177, a short-lived medical radioisotope, has been produced in a commercial nuclear power reactor.

Teollisuuden Voima Oyj (TVO), owner and operator of Finland’s Olkiluoto nuclear power plant, has announced a further delay to the start of regular electricity generation at Unit 3. Commercial operation is now projected to begin this December, rather than the previously announced September. A report from Reuters puts the date at December 10.

According to TVO, material that had detached from the steam guide plates was found in the turbine’s steam reheater last month, requiring inspection and repair work.

French utility giant EDF has announced that its NUWARD small modular reactor design will be the case study for a European early joint regulatory review led by the French Nuclear Safety Authority (ASN). Also participating in the review process will be the Czech Republic’s State Office for Nuclear Safety (SUJB) and Finland’s Radiation and Nuclear Safety Authority (STUK).

Europe’s first EPR, Unit 3 at Finland’s Olkiluoto nuclear power plant, was connected to the nation’s grid on March 12, Teollisuuden Voima Oyj (TVO), the facility’s owner and operator, has announced.

Olkiluoto-3 is also the first new Finnish reactor in four decades, and one of only three new reactors in Europe in the past 15 years. (Romania’s Cernavoda-2 began supplying electricity to the grid in August 2007, and Belarus’s Belarusian-1 in November 2020.)

Framatome announced on February 22 that the Nuclear Regulatory Commission has approved a license amendment that would allow Framatome’s shipping containers to transport, in the United States, fresh nuclear fuel assemblies containing uranium enriched up to 8 percent uranium-235.

Light water reactor fuel with higher enrichments and burnup capabilities than currently used under low-enriched uranium regulation could improve electricity generation and fuel utilization, possibly improving plant economics and providing more flexible reactor performance through extended operating cycles and more efficient core configurations.

Westinghouse Electric Company and Southern Nuclear have agreed to a plan to install four Westinghouse lead test assemblies in Vogtle-2, a 1,169-MWe pressurized water reactor located in Waynesboro, Ga. Four lead test assemblies containing uranium enriched up to 6 percent U-235 will be loaded in Vogtle-2 in 2023, marking the first time that fuel rods with uranium enriched above 5 percent U-235 are put in use in a U.S. commercial power reactor.

As we begin a new year, it is natural not only to look back (see page 24 for top news stories of 2021) but also to look forward. Nuclear News reached out to leaders in the nuclear community to get their predictions on what 2022 has in store, whether broadly or for their specific areas within the community. Although the responses below are wide-ranging and varied, one thing is made clear by all of the respondents: 2022 will see growth and opportunity. The future for nuclear is bright.

A longstanding issue in boiling water reactors—shadow corrosion on zirconium alloy fuel rods and fuel channels—has been reproduced in the Michigan Ion Beam Laboratory as part of an effort to understand and prevent the phenomenon. Research led by Peng Wang, a University of Michigan assistant research scientist in nuclear engineering and radiological sciences, was published in the January 2022 issue of the Journal of Nuclear Materials and described in a recent university news article.

ADVANCED REACTORS MARKETPLACE

GEH’s BWRX-300 SMR technology chosen for Darlington clean energy project

GE Hitachi Nuclear Energy has been selected by Ontario Power Generation as technology partner for the Darlington site's new nuclear plant project. GEH will work with OPG to deploy a BWRX-300 small modular reactor as early as 2028 at the Darlington site in Canada.

■ NuScale Power and Kazakhstan Nuclear Power Plants LLP have signed a memorandum of understanding to explore the deployment of NuScale VOYGR power plants in Kazakhstan. KNPP specializes in the development of nuclear power plant construction in Kazakhstan. The agreement calls for a sharing of nuclear and technical expertise between NuScale and KNPP. Under the MOU, NuScale will support KNPP’s evaluation of NuScale’s SMR technology, including nuclear power plant engineering, construction, commissioning, operation and maintenance, and project-specific studies and design work.

■ PKN ORLEN and Synthos Green Energy have signed an agreement to set up a joint venture, ORLEN Synthos Green Energy, with a goal to prepare and commercialize small nuclear reactor technology, particularly GE Hitachi Nuclear Energy’s BWRX-300 reactors, in Poland. Related, BWXT Canada Ltd. signed a letter of intent with Synthos and GEH for the manufacture of key SMR components for Poland.

The long-delayed Unit 3 at Finland’s Olkiluoto nuclear power plant has achieved initial criticality, plant owner and operator Teollisuuden Voima Oyj (TVO) announced this morning. The reactor, a 1600-MWe Generation III+ EPR supplied by Framatome, started up at 3:22 a.m. local time.

Électricité de France recently announced the formation of an advisory board for NUWARD, France’s small modular reactor project. According to the company, the establishment of the International NUWARD Advisory Board (INAB) is a major step forward in support of the technology’s development.

Mignogna

The world faces an urgent need to decarbonize and expand clean energy systems. Earlier this year, the United States announced goals to achieve a 100 percent clean electricity grid by 2035 and net-zero emissions across the entire economy by 2050. Today, nuclear energy plants provide more than 50 percent of the United States’ carbon-free energy. Existing plants, along with the advanced technologies currently being developed and demonstrated, are crucial to the United States’ and the world’s clean energy future.

Technologies such as advanced non-light water reactors, which have higher operating temperatures than today’s light water reactors, will be vital to meeting economy-wide decarbonization goals. For example, process heat applications and chemical and synthetic fuel production require higher temperatures and currently rely on fossil fuels. Advanced reactors are the only carbon-free technologies that can provide the high temperatures these processes need.

NuScale Power has signed a memorandum of understanding with Prodigy Clean Energy and Kinectrics to explore and inform the development of a regulatory framework to address the licensing and deployment of a marine power station (MPS). The MPS would integrate one to 12 NuScale power modules into a marine-based nuclear power plant system. The MPS would be shipyard-fabricated and marine-transported to its deployment location, where it would be moored in place in sheltered and protected waters at the shoreline. Prodigy is Canada’s first commercial marine nuclear power developer, specializing in integrating existing power reactors into stationary-deployed marine power plant structures. Kinectrics provides life-cycle management services to the electricity industry.