Posters

Engineering Cast Lithium Liners for EM Compression in MTF Machine

Kristin Skrecky (General Fusion)

Actively Cooled Cathodes for Inertial Electrostatic Confinement Fusion

Jan-Philipp Wulfkuhler (TUD Dresden University of Technology), Matti Schulze (TUD Dresden University of Technology), Martin Tajmar (TUD Dresden University of Technology)

Characterizing the Plasma of an Inertial Electrostatic Confinement Device Operating with Argon for Space Propulsion Applications and Hydrogen for Aneutronic Fusion Systems

Rohan Puri (Univ. Illinois, Urbana-Champaign), Erik P. Ziehm (University of Illinois), George H. Miley (University of Illinois), Myles Y. Gong (University of Illinois - Dept of Nuclear, Plasma, and Radiological Engineering)

ITER Low-Field Side Reflectometer (LFSR) Diagnostic Gaussian Telescope Design

Giuseppe Varile (Princeton Plasma Physics Laboratory), Ali Zolfaghari (Princeton Plasma Physics Laboratory), Chirag Patel (Princeton Plasma Physics Laboratory), Timothy Edgemon (Princeton Plasma Physics Laboratory), Mike Duco (Princeton Plasma Physics Laboratory)

Using ECE Diagnostics on ITER for NTM Detection and Studies of Magnetic Island Behavior

J.P. Ziegel (Institute for Fusion Studies, The University of Texas at Austin), W.L. Rowan (Institute for Fusion Studies, The University of Texas at Austin), F.L. Waelbroeck (Institute for Fusion Studies, The University of Texas at Austin)

ITER Low-Field Side Reflectometer (LFSR) Test Antenna Block Assembly Trials

Chirag Patel (Princeton Plasma Physics Laboratory), Ali Zolfaghari (Princeton Plasma Physics Laboratory), Timothy Edgemon (Princeton Plasma Physics Laboratory), Wenping Wang (Princeton Plasma Physics Laboratory)

DIII-D Fiberoptic Bolometer Design and Installation

A. Dvorak (Oak Ridge National Lab), S. Lee (Oak Ridge National Lab), M. Shafer (Oak Ridge National Lab), M. Han (Michigan State University), X. Wang (Michigan State University), M. Syed (Michigan State University), Q. Sheng (Michigan State University)

Filterscope Techniques for Parasitic Signal Screening

K. Butler (Univ. Tennessee, Knoxville), J.B.O. Caughman (ORNL), C.A. Johnson (ORNL), D.C. Easley (Univ. Tennessee, Knoxville), U.A. Unterberg (ORNL), D.C. Donovan (Univ. Tennessee, Knoxville)

Effects on Fueling Pellets from Erosion and Multiple Small Angle Impacts in a Gas Gun Type Pellet Injector

L.R. Baylor (ORNL), S.J. Meitner (ORNL), J.B. Caughman (ORNL), W.D. McGinnis (ORNL)

Implications of Cavity Geometry in a Modular Retarding-Field Energy Analyzer and Characterization of a Kaufman eH-400 Ion Source

Mason Phillips (Univ. Tennessee, Knoxville), Bingzhe Zhao (Univ. Tennessee, Knoxville), Jun Ren (Univ. Tennessee, Knoxville), David Donovan (Univ. Tennessee, Knoxville)

Advancing Fusion Component Design: Leveraging Uncertainty Quantification and Probabilistic Machine Learning for Optimised Material and Component Testing

Ross A.M. Allen (digiLab)

Electromagnetic Analysis of ITER Electron Cyclotron Emission Components and Support Structures

Jiarong Fang (Princeton Plasma Physics Laboratory), Orlando Pastor (Princeton Plasma Physics Laboratory), Jagrut Bhavsar (Princeton Plasma Physics Laboratory), Peter Titus (Princeton Plasma Physics Laboratory)

Palladium Hydride Isotherms Measured Using H2/D2 Mixtures for Temperatures 150 K < T < 393 K

M. Sharpe (University of Rochester)

Modeling tritium inventory in hypothetical designs Using MELCOR-TMAP

Adriaan A. Riet (INL), Matthew D. Eklund (INL)

Separation of Hydrogen from Helium using PdAg Membranes: Experimental and Modeling Results

Victoria Hypes-Mayfield (LANL), Lyra Troy (LANL), David Dogruel (LANL), William Kubic (LANL), Joseph H. Dumont (LANL)

Continued Testing and Modeling of the AirSquared All-Metal Tritium Scroll Pump

Victoria Hypes-Mayfield (LANL), Lyra Troy (LANL), David Dogruel (LANL), William Kubic (LANL), Joseph H. Dumont (LANL)

Trimetallic Ruthenium-Based Heterogenous Catalysts for Low Temperature Ammonia Cracking with Pd-Ag Permeation Membrane for Enhanced Tritium Removal

Christopher J. Koch (SRNL), Jennifer Naglic (University of South Carolina), Lucas Angelette (SRNL), Jochen Lauterbach (University of South Carolina), Tyler Guin (SRNL)

Shutdown Dose-Rate Analysis of Various Breeder Blanket Concepts

Nikolas G. Nelson (University of Tennessee-Knoxville), Son N. Quang (University of Tennessee Knoxville), Nicholas R. Brown (University of Tennessee Knoxville), G. Ivan Maldonado (University of Tennessee Knoxville)

Nested Pebble Bed Blanket (NesPeB)

V. Badalassi (ORNL), J.W. Bae (ORNL), K. Borowiec (ORNL), A. Sircar (ORNL)

Design and Flow Analysis of Diagnostic Shield Module of ITER Upper Port 11

W. Wang (Princeton Plasma Physics Lab.), L. Babu (ORNL), A. Jariwala (Princeton Plasma Physics Lab.), S. Kalwale (ORNL), A. Istomin (ORNL), T. Becker (ORNL), M. Messineo (Princeton Plasma Physics Lab.), T. Edgemon (Princeton Plasma Physics Lab.)

Neutronics Analysis of ITER Upper Port Plug No. 11

B. Linn (Princeton Plasma Physics Laboratory), M. Harb (ORNL), A. Jariwala (Princeton Plasma Physics Laboratory)

Evaluation of the In-Vessel Radiation Conditions During ITER IVVS and DRHS Operations

Aljaz Kolsek (Fusion for Energy), Rafael Juarez (Universidad Nacional de Educación a Distancia), Antonio Jesus Lopez Revelles (Universidad Nacional de Educación a Distancia), Javier Alguacil (Universidad Nacional de Educación a Distancia), Marco Fabbri (Fusion for Energy), Raul Pampin (Fusion for Energy), Gregory Dubus (Fusion for Energy), Javier Sanz (Universidad Nacional de Educación a Distancia)

Neutronics and Activation Analysis of Aluminized RAFM Steel

Marina Rizk (Univ. Tennessee, Knoxville), Nicholas R. Brown (Univ. Tennessee, Knoxville), G. Ivan Maldonado (Univ. Tennessee, Knoxville)

Neutronics Considerations for the use of Entrained Hydride Shielding Materials in a Compact Tokamak

Jack Fletcher (MIT), Ethan Peterson (MIT), Lance Snead (Stony Brook University)

Assessment of Shutdown Dose Rates from SPARC Diagnostic Ports during Maintenance and Casking Activities

Ian R. Miner (Commonwealth Fusion Systems), Allison Sawyer (MPR Assoc.), Megan Wart (Commonwealth Fusion Systems), Ryanne Kennedy (Commonwealth Fusion Systems)

Thermal Hydraulic Modeling of the Lobo Lead Loop with MOOSE

Son Quang (Univ. Tennessee, Knoxville), Nicholas Brown (Univ. Tennessee, Knoxville), G. Ivan Maldonado (University of Tennessee Knoxville)

Flow Analysis of The MSTTE Flow Loop

Anthony G. Bowers (University of Massachusetts at Lowell), Subash L. Sharma (University of Massachusetts Lowell), Thomas F. Fuerst (INL)

Use of Deterministic Methods to Evaluate Detector Response Behind Deep Shield Penetrations

Erin Dubas (MPR Assoc.), Andrew Cooper (Silver Fir Software), Andrea Saltos (Commonwealth Fusion Systems), Ryanne Kennedy (Commonwealth Fusion Systems), Russell Gocht (Commonwealth Fusion Systems), Prasoon Raj (Commonwealth Fusion Systems), Ian Holmes (Commonwealth Fusion Systems)

Browser-Based Neutronics Simulation with Variance Reduction Using Cloud-Based Resources

S.J. Coleman (RadiaSoft LLC), P. Romano (ANL), P. Shriwise (ANL), J. Tramm (ANL)

Physics Informed Plasma Profile Input for OpenMC Fusion Neutronics

B. Taczak (University of Tennessee-Knoxville), L. Casali (University of Tennessee-Knoxville)

A Parametric Workflow for Rapid Optimization of Conceptual Stellarator Configurations Using Parastell and OpenMC

Edgar Pflug (Univ. Wisconsin, Madison), Joshua Smandych (Univ. Wisconsin, Madison), Connor Moreno (Univ. Wisconsin, Madison), Daniel Clark (Type One Energy), Bonita Goh (Type One Energy), Paul Wilson (Univ. Wisconsin, Madison)

Sensitivity Study of Nuclear and Photoatomic Data Libraries on Dose and Heating in Fusion Neutronics Experimental Benchmarks

Jonathan Neal (Commonwealth Fusion Systems), Avery Grieve (Commonwealth Fusion Systems), Andrea Saltos (Commonwealth Fusion Systems), Ryanne Kennedy (Commonwealth Fusion Systems)

An Open Source Fusion Neutronics Materials Library

T.D. Bohm (Univ. Wisconsin, Madison)

FNG HCPB Tritium Breeder Module Mock-up Benchmarking of OpenMC with both CSG and CAD Models

Felipe S. Novais (MIT), Ethan Peterson (MIT)

OpenMC Simulations of the FNG-ITER Dose Rate Experiments

Yogendra S. Panchal (University of Tennessee Knoxville), Marina Rizk (University of Tennessee Knoxville), Son N. Quang (University of Tennessee Knoxville), Nicholas R. Brown (University of Tennessee Knoxville), G. Ivan Maldonado (University of Tennessee Knoxville)

Surface Heat Load Analysis Due to Plasma Thermal Radiation on Equatorial Port 09

Han Zhang (Princeton Plasma Physics Laboratory), Nathan Arnwine (Oak Ridge National Lab), Jiawen Wang (Princeton Plasma Physics Laboratory)

High Field Non-Nuclear Blanket Component Testing User Facility to Complement International Capabilities

B.A. Grierson (General Atomics), P.A. Beharrell (General Atomics), G. Dose (General Atomics), K. Khumthong (General Atomics), B. Lombardo (General Atomics), P. Mijatovic (General Atomics), N. Norausky (General Atomics), M. Tillack (General Atomics), D. Weisberg (General Atomics)

Thermomechanical Analysis of the Plasma-Material Interaction Chamber for the Material Plasma Exposure eXperiment

Aravind Shanmugasundaram (Oakridge National Laboratory), Vivek Rao (ORNL), Adam Aaaron (ORNL), Ted Boyd (ORNL), Michael P. Costa (ORNL), Aftab Hussain (ORNL)

Full Scale Labyrinth Prototype Test Stand for ITER ECE Diagnostic

O. Pastor (Princeton Plasma Physics Laboratory), J. Bhavsar (Princeton Plasma Physics Laboratory), M. Gomez (Princeton Plasma Physics Laboratory), J. Perich (Princeton Plasma Physics Laboratory), G. Taylor (Princeton Plasma Physics Laboratory), W. Rowan (Univ. Texas, Austin), A. Ouroua (Univ. Texas, Austin), S. Schmuck (ITER Org.), Y. Lui (ITER Org.)

Valve Power Supply Optimization for the ITER Shattered Pellet Injection System

M.N. Ericson (ORNL), S.S. Frank (ORNL), L.G. Clonts (ORNL), R.J. Warmack (ORNL), E.G. Brown (ORNL), Andrzej Nycz (ORNL), L.R. Baylor (ORNL), T.E. Gebhart (ORNL)

Development Of Radio-Frequency, Inductively Coupled Plasma Positive Ion Sources for the DIII-D Neutral Beam Injection System

F.M. Laggner (NCSU), A. Mazzeo (NCSU), K J. Ammons (NCSU), M.S. Hossain (NCSU), E. Kallenberg (General Atomics), A.M. Lietz (NCSU), J.T. Scoville (General Atomics), S.C. Shannon (NCSU), B.J. Crowley (General Atomics)

Support Laboratory for Disruption Mitigation Technology

C. Paz-Soldan (Columbia University), E. Felske (Columbia University), S. Gomez (Columbia University), L. Baylor (ORNL), T. Gebhart (ORNL), E. Baykal (Columbia University), P. Dua (Columbia University), D. Gonzalez (Columbia University), S. Guizzo (Columbia University), H. Hersom (Columbia University), C. Lamadrid (Columbia University)

Acceptance of Conductor and Glass Insulation for NSTX-U Inner Toroidal Field Bundle Fabrication

Y. Zhai (Princeton Plasma Physics Laboratory), A. Brooks (PPPL), R. Ellis (PPPL), D. Cai (PPPL), S. Raftopoulos (PPPL), J. Etherington (PPPL), J. Winkleman (PPPL), J. Lucas (ELytt), M. Lopez (Elytt)

Minimizing the Currents in Poloidal Field Coils by Optimizing their Sizes, Structures, and Locations Using the FREDA Framework

Ehab Hassan (ORNL), J.M. Park (ORNL), B.D. Dudson (LLNL), C.S. Collins (ORNL)

Status of the Disruption Mitigation System (DMS) for SPARC

J. Carmichael (Commonwealth Fusion Systems), R. Sweeney (Commonwealth Fusion Systems), B. Post (Commonwealth Fusion Systems), H. Mutha (Commonwealth Fusion Systems), R. Shah (Commonwealth Fusion Systems), B. Stein-Lubrano (MIT), N. Ferraro (Princeton Plasma Physics Laboratory), A. Kleiner (Princeton Plasma Physics Laboratory), V. Izzo (Fiat Lux)

Heat Removal Performance of a Helium Gas Flow in Unidirectional Porous Copper Pipes with Spatially Gradating Pore Structure for Nuclear Fusion Divertors

Ryohei Kubota (Sanyo-Onoda City University), Kohei Yuki (Sanyo-Onoda City University), Kazuhisa Yuki (Sanyo-Onoda City University), Shigeru Tanaka (Kumamoto University), Kazuyuki Hokamoto (Kumamoto University)

Feasibility Study on Heat Pipes for Radio Frequency Antennas

Minuk Jung (MIT), Amy Watterson (MIT), Gregory Wallace (MIT)

A Microwave System for Solenoid-free Startup Studies on Pegasus-III

J.A. Goetz (Univ. Wisconsin, Madison), M.W. Bongard (Univ. Wisconsin, Madison), S.J. Diem (Univ. Wisconsin, Madison), J.K. Peery (Univ. Wisconsin, Madison)

Relationship Between Cathode Spot Formation and Injector Properties During Local Helicity Injection on the Pegasus-III Experiment

Anupama S. Rajendra (Univ. Wisconsin, Madison), Stephanie J. Diem (Univ. Wisconsin, Madison), Benjamin T. Lewicki (Univ. Wisconsin, Madison), Aaron C. Sontag (Univ. Wisconsin, Madison), Kumar Sridharan (Univ. Wisconsin, Madison), Justin D. Weberski (Univ. Wisconsin, Madison)

Isotopically Tailored Materials for Fission and Fusion Systems

Jonah Duran (US DOE, Oak Ridge National Laboratory), Brian Egle (ORNL)

GRIS - A Gas Release Experiment for Investigation of Hydrogen Isotopes Retention in the Metal Structures of a DEMO Blanket

Dmitry Klimenko (KIT - Karlsruhe Institute of Technology), Frederik Arbeiter (KIT - Karlsruhe Institute of Technology), Volker Pasler (KIT - Karlsruhe Institute of Technology), Georg Schlindwein (KIT - Karlsruhe Institute of Technology), Kevin Zinn (KIT - Karlsruhe Institute of Technology)

In-situ Measurement of the Onset of Void Swelling in a Self-ion Irradiated 800H Model Alloy

Max Rae (MIT), Angus Wylie (MIT), Alicia M. Elliott (MIT), Lauren Garrison (Commonwealth Fusion Systems), Michael P. Short (MIT)

Neutron-Induced Tungsten Activation in Divertor and Breeding Blanket Armor Structures for EU DEMO

S. Breidokaite (Lithuanian Energy Institute), G. Stankunas (Lithuanian Energy Institute)

Activation and Transmutation Analyses of Tungsten Boride Alloys for Pulsed Power Fusion Shielding Applications

Christian Arguello (Univ. New Mexico), Eric Lang (The University of New Mexico), Mike Mangan (Sandia)

Observations on Amorphous Phase in Highly Porous Tungsten in ELMs-like High Heat Flux Conditions

Minsuk Seo (Lawrence Livermore National Laboratory), Leigh Winfrey (SUNY Maritime College)

Modular Modeling of Tritium Constraints on the Fuel Cycle for Complex Fusion Deployment Scenarios

Dean Krueger (Univ. Wisconsin, Madison), Matthew Nyberg (Univ. Wisconsin, Madison), Paul P.H. Wilson (Univ. Wisconsin, Madison), Ben Lindley (Univ. Wisconsin, Madison)

Industrial Process Heat Applications for Fusion Heat

Hitarth Shah (Univ. Wisconsin, Madison), Cate Beckman (Univ. Wisconsin, Madison), Kieran Furlong (Realta Fusion), Benjamin Lindley (Univ. Wisconsin, Madison)

Review of Loss of Coolant Accidents for Tokamak Reactors for Probabilistic Risk Assessment

Anthony Garcia (Univ. Wisconsin, Madison), Juliana Duarte (Univ. Wisconsin, Madison), Vicki Bier (Univ. Wisconsin, Madison), Stephanie Diem (Univ. Wisconsin, Madison)

Modeling Resilience of Fusion Blankets to Tokamak Disruptions

M.T. Beidler (ORNL), N.M. Ferraro (Princeton Plasma Physics Laboratory), J.M. Park (ORNL), S. Smolentsev (ORNL), Y. Fan (ORNL), B. Turcksin (ORNL), P.W. Humrickhouse (ORNL), J.D. Lore (ORNL)

OEDGE Modeling of Boron Transport in DIII-D from a Poloidally Localized Divertor Source

B. Putra (Univ. Tennessee, Knoxville), J. Mateja (Univ. Tennessee, Knoxville), D. Donovan (Univ. Tennessee, Knoxville), J. Nichols (ORNL), A. Bortolon (Princeton Plasma Physics Laboratory), F. Effenberg (Princeton Plasma Physics Laboratory)

Development of a High-Temperature Blackbody Emitter for Absolute Calibration of the ITER ECE Diagnostic System

A. Ouroua (University of Texas-Austin), J. Bhavsar (Princeton Plasma Physics Laboratory), S. Manifold (The University of Texas at Austin, Center for Electromechanics), O. Pastor (Princeton Plasma Physics Laboratory), S. Pish (The University of Texas at Austin, Center for Electromechanics), W.L. Rowan (The University of Texas at Austin, Institute for Fusion Studies), G. Taylor (Princeton Plasma Physics Laboratory), M. Werst (The University of Texas at Austin, Center for Electromechanics)

Acoustic State Sensing of Subcooled Boiling Heat Transfer on a CuCrZr Surface Using a Deep Neural Network for Divertor Application

Yoshitaka Ueki (Tokyo University of Science), Yuta Aoki (Tokyo University of Science), Naoya Maeda (Tokyo University of Science), Noriyuki Unno (Tokyo University of Science), Kazuhisa Yuki (Sanyo-Onoda City University), Yohji Seki (National Institutes for Quantum Science), Shin-ichi Satake (Tokyo University of Science)

Ion Constants of Motion in the Orbitron Fusion Device

J. Carlsson (Avalanche Energy Designs), A. Cole (Avalanche Energy Designs), R. Langtry (Avalanche Energy Designs), D. Merthe (Avalanche Energy Designs)