ANS is committed to advancing, fostering, and promoting the development and application of nuclear sciences and technologies to benefit society.
Explore the many uses for nuclear science and its impact on energy, the environment, healthcare, food, and more.
Division Spotlight
Decommissioning & Environmental Sciences
The mission of the Decommissioning and Environmental Sciences (DES) Division is to promote the development and use of those skills and technologies associated with the use of nuclear energy and the optimal management and stewardship of the environment, sustainable development, decommissioning, remediation, reutilization, and long-term surveillance and maintenance of nuclear-related installations, and sites. The target audience for this effort is the membership of the Division, the Society, and the public at large.
Meeting Spotlight
ANS Student Conference 2025
April 3–5, 2025
Albuquerque, NM|The University of New Mexico
Standards Program
The Standards Committee is responsible for the development and maintenance of voluntary consensus standards that address the design, analysis, and operation of components, systems, and facilities related to the application of nuclear science and technology. Find out What’s New, check out the Standards Store, or Get Involved today!
Latest Magazine Issues
Feb 2025
Jul 2024
Latest Journal Issues
Nuclear Science and Engineering
March 2025
Nuclear Technology
Fusion Science and Technology
February 2025
Latest News
Colin Judge: Testing structural materials in Idaho’s newest hot cell facility
Idaho National Laboratory’s newest facility—the Sample Preparation Laboratory (SPL)—sits across the road from the Hot Fuel Examination Facility (HFEF), which started operating in 1975. SPL will host the first new hot cells at INL’s Materials and Fuels Complex (MFC) in 50 years, giving INL researchers and partners new flexibility to test the structural properties of irradiated materials fresh from the Advanced Test Reactor (ATR) or from a partner’s facility.
Materials meant to withstand extreme conditions in fission or fusion power plants must be tested under similar conditions and pushed past their breaking points so performance and limitations can be understood and improved. Once irradiated, materials samples can be cut down to size in SPL and packaged for testing in other facilities at INL or other national laboratories, commercial labs, or universities. But they can also be subjected to extreme thermal or corrosive conditions and mechanical testing right in SPL, explains Colin Judge, who, as INL’s division director for nuclear materials performance, oversees SPL and other facilities at the MFC.
SPL won’t go “hot” until January 2026, but Judge spoke with NN staff writer Susan Gallier about its capabilities as his team was moving instruments into the new facility.
Technical Session
Monday, September 26, 2022|1:10–3:15PM PDT|Grand Pacific D
Session Chair:
Davide Mazzucconi (Politecnico di Milano)
Alternate Chair:
Georgeta Radulescu (ORNL)
Session Organizer:
Thomas M. Miller (ORNL)
To access paper attachments, you must be logged in and registered for the meeting.
Register NowLog In
Overview of ORNL SCALE Shielding Analyses for Spent Nuclear Fuel Transportation and Storage Applications
1:10–1:35PM PDT
Georgeta Radulescu (ORNL), Cihangir Celik (ORNL), Peter Stefanovic (ORNL)
Paper
Decommissioning-Oriented Design of Concrete Bunker in a Medical Cyclotron Facility: A Case Study
1:35–2:00PM PDT
Andrea Pola (Politecnico di Milano), Davide Mazzucconi (Politecnico di Milano), Davide Bortot (Politecnico di Milano), Alessandro Porta (Politecnico di Milano), Stefano Agosteo (Politecnico di Milano)
Radiological Characterization Studies for the CNGS Dismantling
2:00–2:25PM PDT
Claudia Ahdida (CERN), Elzbieta Nowak (CERN), Christelle Saury (CERN), Heinz Vincke (CERN), Helmut Vincke (CERN)
Activation Calculation Using Three-Dimensional Monte Carlo Code in a Pressurized Water Reactor
2:25–2:50PM PDT
Takuma Sugihara (Mitsubishi Heavy Industries), Tomohiro Ogata (Mitsubishi Heavy Industries), Kuniaki Konishi (Mitsubishi Heavy Industries), Shozo Komori (Kyushu Electric Power Co.), Yasuaki Inokuchi (Kyushu Electric Power Co.)
To join the conversation, you must be logged in and registered for the meeting.
