ANS is committed to advancing, fostering, and promoting the development and application of nuclear sciences and technologies to benefit society.
Explore the many uses for nuclear science and its impact on energy, the environment, healthcare, food, and more.
Division Spotlight
Operations & Power
Members focus on the dissemination of knowledge and information in the area of power reactors with particular application to the production of electric power and process heat. The division sponsors meetings on the coverage of applied nuclear science and engineering as related to power plants, non-power reactors, and other nuclear facilities. It encourages and assists with the dissemination of knowledge pertinent to the safe and efficient operation of nuclear facilities through professional staff development, information exchange, and supporting the generation of viable solutions to current issues.
Meeting Spotlight
2024 ANS Winter Conference and Expo
November 17–21, 2024
Orlando, FL|Renaissance Orlando at SeaWorld
Standards Program
The Standards Committee is responsible for the development and maintenance of voluntary consensus standards that address the design, analysis, and operation of components, systems, and facilities related to the application of nuclear science and technology. Find out What’s New, check out the Standards Store, or Get Involved today!
Latest Magazine Issues
Sep 2024
Jan 2024
Latest Journal Issues
Nuclear Science and Engineering
October 2024
Nuclear Technology
Fusion Science and Technology
August 2024
Latest News
NRC agrees to reevaluate seismic risk at Diablo Canyon
In response to a petition filed by environmental groups earlier this year, the Nuclear Regulatory Commission will reinvestigate earthquake fault lines and the potential for seismic activity and ensuing damage at California’s Diablo Canyon nuclear power plant.
Carl A. Beard, J. Wiley Davidson, Robert A. Krakowski, Morris E. Battat
Nuclear Technology | Volume 110 | Number 3 | June 1995 | Pages 321-356
Technical Paper | Actinide Burning and Transmutation Special / Nuclear Fuel Cycles | doi.org/10.13182/NT95-A35106
Articles are hosted by Taylor and Francis Online.
Transmutation of long-lived nuclear waste (trans-uranic actinides and long-lived fission products) currently stored in spent reactor fuels may represent an attractive alternative to deep geologic disposal. The aqueous-based accelerator transmutation of waste (ATW) concept as proposed by Los Alamos National Laboratory uses a proton accelerator to produce a 1.6-GeV, 250-mA (∼400 MW) beam that is split four ways and directed to four D2O-cooled solid tungsten-lead composite targets. Each target in turn is centered in a heavy water moderated, highly multiplying, actinide (oxide)-slurry blanket. High thermal-neutron fluxes are produced that allow high transmutation reaction rates at low material (actinide, long-lived fission product) inventories. The target-blanket system for ATW resides at an interface separating two major systems that are crucial to the economic and technical success of the concept: (a) the high-energy (power-intensive) accelerator delivering 0.8 to 1.6 GeV protons to the high-Z spallation neutron source and (b) the chemical-plant equipment (CPE) that provides feedstock appropriate for efficient and effective transmutation. Parametric studies have been performed to assess the effects of the target-blanket on overall system performance with regard to neutron economy, chemical-processing efficiency, and thermal-hydraulic design options. Based on these parametric evaluations, an interim base-case aqueous-slurry ATW design was selected for more detailed analyses. This base-case target-blanket consists of an array of Zr-Nb pressure tubes placed in a heavy water moderator surrounding a heavy-water-cooled tungsten-lead target. Neutronics and thermal-hydraulic calculations focusing primarily on the blanket indicate that each of the four ATW target-blanket modules operating with a neutron multiplication keff = 0.95 can transmute the actinide waste and the technetium and iodine waste from ∼ 2.5 light water reactors (LWRs). In addition, by recovering and converting the fission heat, sufficient electricity can be produced both to operate the accelerator and to supply power to the grid for revenue generation; the full (400-MW beam) system would service ∼ 10 LWRs, which at 835 MW(thermal)/ LWR (1363 mol/yr actinide), a thermal-to-electric conversion efficiency of 0.30, and an overall “wall-plug” accelerator efficiency of 0.50 would allow about two-thirds of the 2500-MW(electric) (gross) power to be delivered to the grid. The neutronics-, thermal-hydraulics-, and accelerator-CPE-interface consideration, needed to ensure this performance, is examined for the aqueous-slurry ATW. These broad-based parametric studies have provided guidance to a preliminary conceptual engineering design of the aqueous-slurry ATW blanket concept.