ANS is committed to advancing, fostering, and promoting the development and application of nuclear sciences and technologies to benefit society.
Explore the many uses for nuclear science and its impact on energy, the environment, healthcare, food, and more.
Division Spotlight
Accelerator Applications
The division was organized to promote the advancement of knowledge of the use of particle accelerator technologies for nuclear and other applications. It focuses on production of neutrons and other particles, utilization of these particles for scientific or industrial purposes, such as the production or destruction of radionuclides significant to energy, medicine, defense or other endeavors, as well as imaging and diagnostics.
Meeting Spotlight
Utility Working Conference and Vendor Technology Expo (UWC 2024)
August 4–7, 2024
Marco Island, FL|JW Marriott Marco Island
Standards Program
The Standards Committee is responsible for the development and maintenance of voluntary consensus standards that address the design, analysis, and operation of components, systems, and facilities related to the application of nuclear science and technology. Find out What’s New, check out the Standards Store, or Get Involved today!
Latest Magazine Issues
Jul 2024
Jan 2024
Latest Journal Issues
Nuclear Science and Engineering
September 2024
Nuclear Technology
August 2024
Fusion Science and Technology
Latest News
Taking shape: Fusion energy ecosystems built with public-private partnerships
It’s possible to describe fusion in simple terms: heat and squeeze small atoms to get abundant clean energy. But there’s nothing simple about getting fusion ready for the grid.
Private developers, national lab and university researchers, suppliers, and end users working toward that goal are developing a range of complex technologies to reach fusion temperatures and pressures, confounded by science and technology gaps linked to plasma behavior; materials, diagnostics, and electronics for extreme environments; fuel cycle sustainability; and economics.
M. Segev, A. Galperin, E. Schwageraus
Nuclear Science and Engineering | Volume 135 | Number 3 | July 2000 | Pages 280-287
Technical Paper | doi.org/10.13182/NSE00-A2140
Articles are hosted by Taylor and Francis Online.
Shortly after the loading of a pressurized water reactor (PWR) core, the axial power distribution in fresh fuel has already attained the characteristic, almost flat shape, typical of burned fuel. At beginning of cycle (BOC), however, the axial distribution is centrally peaked. In assemblies hosting uniform burnable boron rods, this BOC peaking is even more pronounced. A reduction in the axial peaking is today often achieved by shortening the burnable boron rods by some 30 cm at each edge.It is shown that a two-zone grading of the boron rod leads, in a representative PWR cycle, to a reduction of the hot-spot temperature of ~70°C, compared with the nongraded case. However, with a proper three-zone grading of the boron rod, an additional 20°C may be cut off the hot-spot temperature. Further, with a slightly skewed application of this three-zone grading, an additional 50°C may be cut off.The representative PWR cycle studied was cycle 11 of the Indian Point 2 station, with a simplification in the number of fuel types and in the burnup distribution. The analysis was based on a complete three-dimensional burnup calculation. The code system was ELCOS, with BOXER as an assembly code for the generation of burnup-dependent cross sections and SILWER as a three-dimensional core code with thermal-hydraulic feedback.