ANS is committed to advancing, fostering, and promoting the development and application of nuclear sciences and technologies to benefit society.
Explore the many uses for nuclear science and its impact on energy, the environment, healthcare, food, and more.
Division Spotlight
Decommissioning & Environmental Sciences
The mission of the Decommissioning and Environmental Sciences (DES) Division is to promote the development and use of those skills and technologies associated with the use of nuclear energy and the optimal management and stewardship of the environment, sustainable development, decommissioning, remediation, reutilization, and long-term surveillance and maintenance of nuclear-related installations, and sites. The target audience for this effort is the membership of the Division, the Society, and the public at large.
Meeting Spotlight
2024 ANS Winter Conference and Expo
November 17–21, 2024
Orlando, FL|Renaissance Orlando at SeaWorld
Standards Program
The Standards Committee is responsible for the development and maintenance of voluntary consensus standards that address the design, analysis, and operation of components, systems, and facilities related to the application of nuclear science and technology. Find out What’s New, check out the Standards Store, or Get Involved today!
Latest Magazine Issues
Oct 2024
Jul 2024
Latest Journal Issues
Nuclear Science and Engineering
November 2024
Nuclear Technology
Fusion Science and Technology
Latest News
Kazakh voters say “yes” to nuclear power
A historic referendum in Kazakhstan this past weekend showed that its citizens strongly support adding nuclear generation to the nation’s energy supply.
M. Ulrickson, G. Barnes, H.M. Fan, G. Labik, D. Loesser, L. Lontai, D.K. Owens
Fusion Science and Technology | Volume 21 | Number 3 | May 1992 | Pages 1817-1822
Plasma-Facing Component | doi.org/10.13182/FST92-A29982
Articles are hosted by Taylor and Francis Online.
Carbon fiber composite (CFC) materials have been used as the plasma facing surface on limiters in TFTR since 1989. We changed from all POCO graphite tiles on the inner bumper limiter (BL) to about 1/3 CFC tiles in the high heat flux area because of tile failures with heating powers up to 20 MW. The RF limiters (RFL), which were designed to protect the radio-frequency antennas from plasma heat flux, were designed with CFC material. This paper discusses the design issues related to the CFC materials, our experience with material property variations in large production runs, and our operational experience with CFC limiters. The replacement BL tiles were made from a 3D CFC material. The RFL tiles were made from a 2D CFC. The use of 2D CFC material was molded to near net shape. The tiles were required to withstand up to 105 cycles of 50 MW of heating power for a duration of 2 s. Determination of the minimum material properties was one of the major design issues. The fabrication of the BL tiles required production of about 35 large billets of 3D CFC material. The fabrication of the RFL tiles required production of about 160 tile blanks. We found substantial variation in the material properties of the finished parts. The distribution of the material property data is discussed. In the case of the RFL tiles some parts did not meet the required properties because of the non-standard nature of the fabrication. After nearly two years of operation on the CFC tiles, none of the CFC tiles have failed. The only damage observed on the CFC tiles is a slight darkening of the tile when it is heated to the sublimation point by the disruption heat loads. Recommendations of the best design and fabrication strategies for CFC plasma facing components are made.